SAMZO 9CH4110BEKA
Product Overview
Function: DC Power Jack
Usage: Used for connecting DC power to electronic devices.
Key Features: High-current capability, durable construction, reliable electrical and mechanical performance.
Application Scenarios: Suitable for various electronic equipment requiring DC power input.
Brand
SAMZO
Origin
China
Model Number
9CH4110BEKA
Product Code
9CH4110BEKA
Customer Part Number
9CH4110BEKA
Company Specification Number
20160224003
Rating
DC 30V 10A
Technical Specifications
| Item | Test Conditions | Performance / Specification | Units |
|---|---|---|---|
| Mechanical | Connection/Disconnection Force (using standard plug gauge 3 times) | 3 ~ 20 | N |
| Connection Force | |||
| Disconnection Force | 3 ~ 20 | N | |
| Terminal Strength | Static load of 0.1N/m (1kgf/cm) applied to terminal tip for 1 min in any direction | No damage to terminal, satisfies electrical and mechanical characteristics | |
| Electrical | Contact Resistance (measured at small current, 100mA or less, 1000Hz) | ≤0.03 | Ω |
| Contact Resistance | |||
| Insulation Resistance | Apply 500V DC for 1 min (between body and conductor; between conductors not to be contact; between conductors not to be when plug is inserted) | ≥100 | MΩ |
| Dielectric Strength | AC 500V rms (50-60Hz) for 1 min, trip current 0.5mA (between body and conductor; between conductors not to be contact; between conductors not to be when plug is inserted) | No damage, arcing, or breakdown | |
| Durability | Solderability Test: Terminals dipped 1mm in solder bath at 240±5 for 3±0.5 sec | (1) Solder wetting time ≤3 sec (2) Soldering area >75% | |
| Resistance to Soldering Heat Test | Soldering iron method: Bit temperature 330±5, application time 3±0.5 sec (no excessive pressure) | No deformation of case, no excessive looseness of terminals, satisfies electrical characteristics | |
| Humidity Test | Stored at 40±2 and 90%-96% humidity for 96 Hr, then maintained at standard atmospheric condition for 1 Hr | No appearance damage, satisfies mechanical and electrical characteristics | |
| Heat Test | Stored at 70±2 for 96 hours, then controlled recovery for 1 hour | ||
| Cold Test | Stored at -25±3 for 96 hours, then controlled recovery for 1 hour | No appearance damage, satisfies mechanical and electrical characteristics | |
| Life Test | Without load: 5,000 cycles at 10-25 cycles/min (insertion/disconnection with mating plugs) | (1) Contact Resistance ≤0.1 Ω (2) Disconnection Force 3 to 20 N (3) Satisfies mechanical and electrical characteristics | |
| With load (rating condition, non-inductive load): 1,000 cycles at 10-20 cycles/min (insertion/disconnection) | |||
| Temperature Cycling Test | 5 cycles of specified temperature profile (-40 to 60), then 30 min at room ambient | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30mΩ. Insulation Resistance: Min. 100 MΩ. Dielectric Withstanding Voltage: 500VAC/min (between terminals) | |
| Heat Shock Test | 6 cycles of specified temperature profile (-10 to 60), then 30 min at room ambient | No deformation or cracks in molded part. Insertion & Extraction Force: 3 to 20N. Contact Resistance: Max. 30mΩ. Insulation Resistance: Min. 100 MΩ. Dielectric Withstanding Voltage: 500VAC/min (between terminals) |
Model Definition
| Parameter | Value |
|---|---|
| Mould Number | MX7506DC1 |
| Needle Diameter | 5.0 mm |
| Fixing Method | Without Fixed Column |
| Interface Method | Flat Opening |
| Overall Length | 14.7 mm |
| Pin Position | 4 Pin |
| Mounting Method | Wire Welding |
| Product Series | High-Current Power Jacks |
Schematic
| Pin | Type |
|---|---|
| 1 | POWER PIN*2 |
| 2 | GROUND PIN |
| 3 | CENTER PIN |
| 4 | GROUND PIN*2 |
Material Composition
| Item | Description | Material | Quantity | Finish |
|---|---|---|---|---|
| 1 | POWER | COPPER ALLOY | 1 | Ni Gold |
| 2 | CENTER | COPPER ALLOY | 1 | Gold |
| 3 | SHIELD | COPPER ALLOY | 1 | Gold |
| 4 | GROUND | COPPER ALLOY | 1 | Gold |
| 5 | HIGH TEMP PLASTIC HOUSING | PLASTIC HOUSING | 1 |
TE Connectivity 1982299-4
Product OverviewProduct Name: Housing, Receptacle, Wire-to-Board, 2 Position, 7.8 mm [.307 in] Centerline, Wire & Cable, UL 94V-0, ELCON Mini, Rectangular Power ConnectorsDescription: This is a 2-position wire-to-board receptacle housing for power connectors, featuring a 7.8 mm [.307 in] centerline. ...
Anderson Power 1327FP-BK
Product Overview Anderson Power Products' SPEC Pak Connector Series offers rugged, environmentally sealed (IP68) shells designed to protect existing APP Powerpole contacts and housings. These customer-configurable connectors are ideal for high-power interconnects with signal and ground capabilities ...
Anderson Power 5915-BK
Product Overview The Anderson Power Products SPEC Pak Sealed Power connectors are rugged, environmentally sealed (IP68) interconnect solutions designed for high-power applications in harsh environments. These connectors are customer-configurable, offering thousands of design options to meet specific ...
TE Connectivity 5787531-1
Product Details This document outlines the specifications for a connector assembly, including its housing, contact material, plating, and recommended PCB mounting dimensions. It is designed for applications requiring reliable electrical connections with specific mating and soldering requirements. ...
