DEUTSCH 0462-201-16141
Deutsch DT Series Connectors
The Deutsch DT Series connectors are environmentally-sealed, general-purpose connectors designed specifically for cable-to-cable applications in harsh environments such as on the engine, transmission, under the hood, on the chassis, or in the cab. They offer high reliability and performance at a low cost, making them ideal for signal-level circuits where connection degradation can be critical. The series utilizes thermoplastic housings and silicone seals to withstand extreme temperatures and moisture. Contacts are available in either solid-copper crimp type or stamped and formed types, with spring action designed into the socket and shrouded by a stainless steel hood for positive axial alignment and protection against probe damage. Secondary locks ensure positive retention, with a fail-safe mechanism to ensure proper seating during mating.
Brand
Deutsch
Series
DT, DTM, DTP, DTHD
Operating Temperature
-55C to +125C
Environmental Seal
Superior Environmental Seal
Contact Retention
Positive Contact Retention
Assembly Feedback
Tactile and Audible Assembly Feedback
Maintenance
No Special Tools Required (Except DTHD)
Cost
Low Costs, High Reliability
| Series | Contact Size | Wire Gauge (AWG) | Current Rating (Amps @ 125C) | Key Feature |
|---|---|---|---|---|
| DTM | 20 | 22 - 16 | 7.5 | Miniature contact, enhanced design for harsh environments, reliable signal circuits. |
| DT | 20, 16 | 20 - 14 (Size 16) | 13 (Size 16) | General purpose, environmentally-sealed, cable-to-cable applications. |
| DTP | 12 | 14 - 10 | 25 | Higher amperage, multi-pin, power applications. |
| DTHD | 4, 8, 12 | 14 - 6 | 25 to 100 | Single power circuit termination, environmentally sealed, permanent end caps for critical circuits. Designed for fuel/oil exposure. |
| Series | Seal Diameter Range (mm) | Contact Retention (lbs / N) |
|---|---|---|
| DTM | 1.35 - 3.05 | 20 lbs (89N) for Size 20 |
| DT | 1.35 - 3.68 | 25 lbs (111N) for Size 16 |
| DTP | 2.46 - 4.32 | 30 lbs (133N) for Size 12 |
| DTHD | 3.40 - 7.42 | 35 lbs (156N) for Size 8 & 4 |
| Specification | Value |
|---|---|
| Dielectric Withstanding Voltage | 1500 VAC (current leakage less than 2 mA) |
| Insulation Resistance | 1000 megohms minimum at 25C |
| Submersion | Withstands immersion under three feet of water |
| Vibration | No unlocking/unmating, no damage after 20 G's sinusoidal vibration (10-2000 Hz) |
| Fluid Resistance | No damage when exposed to most industrial fluids |
| Thermal Cycle | No cracking, chipping or leaking after 20 cycles (-55C to +125C) |
kinghelm KH-281511-TP
Product InquiryModelKH-281511-TPModelTechnical DetailsKH-281511-TPTechnical details available upon inquiry.
TE Connectivity 170362-4
Product OverviewThe 170362-4 is a Socket Contact designed for power applications within the Mini-Universal MATE-N-LOK series. It features a crimp termination method for wires and is constructed from phosphor bronze with tin plating for reliable conductivity. This contact is rated for 600 VAC and 600 ...
kinghelm KH-204065-DZ
Product OverviewNo overview information available.Product NameKH-204065-DZBrandRARES
Keystone 5119
Product OverviewColor-keyed THM (Thru-Hole Mount) test points provide an economical, high-visibility solution for PC test point terminations. Designed for high-density packaging, these test points feature snap-fit mounting for positive retention during wave soldering and a wire-form loop for safe, ...
