JUSHUO AFC20-S04ACA-00
Product Acknowledgement
This document serves as a product acknowledgement for the 2.0mm pitch horizontal SMT connector, model AFC20-S**ACA-00. It details the product's specifications, characteristics, and requirements.
Standard Rating, Packaging, Transport, Storage, Part Name & Material, Appearance
| Item | Specifications |
|---|---|
| Rated Voltage | 250V AC/DC |
| Rated Current | 2.0A |
| Operating Temperature Range | -25+105 |
| Operating Humidity Range | Below 90% RH |
| Environmental Protection | Complies with ROHS environmental requirements. |
| Packing | Inner packing: continuous reel; Outer packing: carton. Product sealed in box, no shaking. |
| Transport | Allowed by any means. Avoid rain, snow, sunlight. Prevent collision, extrusion. Transport Temperature: -20 to +50. |
| Storage | Store in a warehouse with ambient temperature -20+50, relative humidity not exceeding 90%, and no acidic, alkaline, or corrosive gases. |
| Part Name / Material | Base: LCP E130i Pin: Brass Stator: Brass |
| Appearance | Plastic parts: free of scars, discoloration, cracks, burrs, flash, material shortage, deformation. Metal parts: smooth, no rust, oxidation, peeling, blackening, mechanical damage. |
Electrical Characteristics
| No. | Project | Test Method | Performance Requirements |
|---|---|---|---|
| 9.1 | Contact Resistance | Plugged connector tested with contact resistance meter. | 20m Max |
| 9.2 | Insulation Resistance | Plugged connector, 1000V DC applied between adjacent contacts and between contacts and enclosure for 1 minute. | 1000M Min |
| 9.3 | Withstand Voltage | Plugged connector, 1000V AC applied between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown or flashover phenomena. |
Environmental Characteristics
| No. | Project | Test Method | Performance Requirements |
|---|---|---|---|
| 10.1 | Heating Test | Plugged connector in +1052 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 30m Max. |
| 10.2 | Cold Tolerance Test | Plugged connector in -252 for 96H, then 1-2H at normal temp. | Appearance: No damage. Contact Resistance: 30m Max. |
| 10.3 | Moisture Resistance Test | Plugged connector in 402, 90-96% RH for 96H, then 1-2H at normal temp. | Appearance: No damage. Insulation Resistance: 500M Min. Withstand Voltage: 600V AC/minute Min. |
| 10.4 | Temperature Cycle | 5 cycles: -253 (30min) -> Room Temp (1h) -> +1053 (30min) -> Room Temp (1h). Recover 2H at normal temp. | Appearance: No abnormalities. Contact Resistance: 30m Max. |
| 10.5 | Salt Spray Test | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover 1-2H at normal temp. | Appearance: No damage, corrosion. Hardware: no serious rust exposing base metal. Slight corrosion on blanking surface allowed if performance unaffected. Contact Resistance: 30m Max. |
| 10.6 | Weldability | Dipped in 2455 tin solution for 2.50.5 seconds. | Tin area: 95% or more. |
| 10.7 | Soldering Resistance | Product subjected to 2605 reflow or wave soldering for 51S on PCB. | 1. Plastic parts: no obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
Mechanical Properties
| No. | Project | Test Method | Performance Requirements | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11.1 | Pin Fixing Force | Fix pin holder, apply force at pin front end at 253mm/min until pin withdraws. | Single Pin: 10N Min. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.2 | Terminal Retention in Plastic Parts | Terminal matched with socket, pull force at 253mm/min along wire direction. | Single Terminal: 7N Min. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.3 | Mechanical Life | Plug and unplug 50 times at 10 times/min without power. | Contact Resistance: 30m Max. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.4 | Insertion/Extraction Force | (1) Fit socket and terminal, test insertion/extraction on same axis with pin holder. Remove socket lock. Test speed: 205mm/min. | (2) Performance Requirements:
|
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
