JUSHUO AFC10-S06QCA-00
Product Overview
Product Name: 1.0mm
Product Model: AFC10-S**QCA-00 (**PIN)
Description: This specification is applicable to the 1.0mm series horizontal SMT connector, model AFC10-S**QCA-00.
| Item | Specification | Requirement |
|---|---|---|
| Rated Voltage | 50V | |
| Rated Current | 0.5A AC/DC | |
| Operating Temperature Range | -25+105 | |
| Operating Humidity Range | Relative humidity is below 90% | |
| Inner Packing | (Joint and several) | |
| Outer Packing | (Carton) | |
| Transport Temperature | -20 to +50 | Avoid rain, snow, sunlight, collision, extrusion |
| Storage Temperature | -20 to +50 | Relative humidity 90%, no corrosive gases |
| Part Name | Model | Material |
|---|---|---|
| Base | 1.0 LCP E130i | LCP |
| Reed | 1.0 | Phosphor copper |
| Stator | 1.0 | Phosphor copper |
| Number | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 9.1 | Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max |
| 9.2 | Insulation Resistance | Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100M Min |
| 9.3 | Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| Number | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 10.1 | Heating Test | Place in +1052 environment for 96H, then recover for 1-2H. | Appearance: no damage; Contact Resistance: 30m Max |
| 10.2 | Cold Tolerance Test | Place in -252 environment for 96H, then recover for 1-2H. | Appearance: no damage; Contact Resistance: 30m Max |
| 10.3 | Moisture Resistance Test | Place in 402, 90-96% RH environment for 96H, then recover for 1-2H. | Appearance: no damage; Insulation Resistance: 50M Min; Withstand Voltage: 200VAC/min |
| 10.4 | Temperature Cycle | 5 cycles of -25 (30min) -> Room Temp (1H) -> +105 (30min) -> Room Temp (1H), then recover for 2H. | Appearance: no abnormalities; Contact Resistance: 30m Max |
| 10.5 | Salt Spray Test | Continuous spray with 5% NaCl solution for 24H, wash, then recover for 1-2H. | Appearance: no damage/corrosion; Contact Resistance: 30m Max |
| 10.6 | Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin coverage area 95% |
| 10.7 | Soldering Resistance | Reflow or wave soldering at 2605 for 51S. | 1. Plastic parts: no deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| Number | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 11.1 | Pin Fixing Force | Apply force at the front end of the pin at 253mm/min until it withdraws. | Single pin: 7N Min |
| 11.2 | Terminal Retention in Plastic Parts | Pull force along conductor direction at 253mm/min. | Single terminal: 5N Min |
| 11.3 | Mechanical Life | Plug and unplug 50 times at 10 times/min (no power). | Contact Resistance: 30m Max |
| 11.4 | Insert Force/Draw Force | Test with hole seat and terminal matched, on the same axis, remove lock during test (205mm/minute). | See table below |
| PIN Position | Insert (N) | Pull Out (N) | PIN Position | Insert (N) | Pull Out (N) |
|---|---|---|---|---|---|
| 1 | 3.00 | 0.50 | 9 | 29.00 | 5.50 |
| 2 | 8.00 | 2.00 | 10 | 32.00 | 6.00 |
| 3 | 11.00 | 2.50 | 11 | 35.00 | 6.50 |
| 4 | 14.00 | 3.00 | 12 | 38.00 | 7.00 |
| 5 | 17.00 | 3.50 | 13 | 41.00 | 7.50 |
| 6 | 20.00 | 4.00 | 14 | 44.00 | 8.00 |
| 7 | 23.00 | 4.50 | 15 | 47.00 | 8.50 |
| 8 | 26.00 | 5.00 | 16 | 50.00 | 9.00 |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
