JUSHUO GH125-S06CCA-00
Product Overview
Product Name: 1.25mm (1.25mm Vertical Surface Mount Connector with Latch)
Product Model: GH125-S**CCA-00 (** represents PIN count)
Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Application: This specification is applicable to GH series products.
Company Address
Contact Person
(Liu Zhonghua)
(Wang Bin)
(Xing Kunxin)
Phone
N/A
Fax
N/A
N/A
Version No
1 1 version
Page Number
Page 2 of 8, Page 3 of 8, Page 4 of 8, Page 5 of 8, Page 6 of 8, Page 7 of 8, Page 8 of 8
| Item | Specifications | Details |
|---|---|---|
| Rated Voltage | 50V AC/DC | |
| Rated Current | 1.0A | |
| Operating Temperature Range | -2585 | |
| Operating Humidity Range | Below 90% Relative Humidity | |
| Environmental Protection | RoHS Compliant | Products in line with ROHS environmental protection requirements. |
| Packing | Inner packing: Joint and several; Outer packing: Carton. Sealed in the box without shaking. | |
| Transport Temperature | -20 to +50 | Allowed by any means, avoid rain, snow, sunlight, collision, extrusion. |
| Storage Temperature | -20 to +50 | Relative humidity not more than 90%, no acid, alkaline, or corrosive gases. |
| Part Name | Model | Material |
|---|---|---|
| Base | GH | LCP E130i |
| Pin | GH | Phosphor Copper |
| Stator | GH | Phosphor Copper |
| No. | Project | Test Method | Performance Requirements |
|---|---|---|---|
| 9.1 | Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max |
| 9.2 | Insulation Resistance | Plug in the connector, apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min |
| 9.3 | Withstand Voltage | Plug in the connector, apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| 10.1 | Heating Test | Place plug connector in +852 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 60m Max. |
| 10.2 | Cold Tolerance Test | Place plug connector in -252 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 60m Max. |
| 10.3 | Moisture Resistance Test | Place plug connector in 402, 90-96% RH environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN. |
| 10.4 | Temperature Cycle | -253 (30min) -> Room Temp (1H) -> +853 (30min) -> Room Temp (1H). 5 cycles. Recover 2H. | Appearance: No abnormalities. Contact Resistance: 60m Max. |
| 10.5 | Salt Spray Test | Continuous spray with 51% NaCl solution for 24H. Wash with distilled water, recover 1-2H. | Appearance: No damage, corrosion. Contact Resistance: 60m Max. |
| 10.6 | Weldability | Dip welded part into 2605 tin solution for 2.50.5 seconds. | Tin area: 95% or more. |
| 10.7 | Soldering Resistance | Place connector on PCB, reflow at 2605 or wave solder for 51S. | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| 11.1 | Pin Fixing Force | Apply force on pin at rate of 253mm/min until pin withdraws. | Single pin: 5N Min. |
| 11.2 | Terminal Retention in Plastic Parts | Pull terminal from socket at rate of 253mm/min along conductor direction. | Single terminal: 7N Min. |
| 11.3 | Mechanical Life | Plug and unplug 30 times at 10 times/min without power. | Contact Resistance: 80m Max. |
| 11.4 | Terminal Crimp Wire Strength | Axial pullout force at rate of 253mm/min. | 26AWG wire: 17.8N. 28AWG wire: 8.9N. 30AWG wire: 4.4N. 32AWG wire: 2.2N. |
| 11.5 | Insertion/Pull-out Force | Fit socket and terminal, test insertion/removal on same axis. Remove lock of hole seat (test speed: 205mm/min). | Insertion Force: 2N (Per pin). Pull-out Force: 0.3N (Per pin). |
HRS DF56C-26S-0.3V(51)
Product InformationThis document appears to be a label or part of a manual for a product. The text is largely unreadable due to image quality or formatting. No specific product overview, advantages, or application scenarios can be extracted.Part NumberModelDateSIU3PUOCSIL0IMOPUIM SI(BS N0 121032023...
HRS DF36A-25S-0.4V(51)
Product OverviewThe DF36 Series is a 0.4mm pitch, vertical mating, micro-coaxial cable connector designed for high-density applications. It offers a reliable connection solution for micro-coaxial cables, featuring space-saving configurations suitable for modern electronic devices.Brand: Hirose ...
HRS DF56C-30S-0.3V(51)
Product OverviewThe provided text appears to be a scanned document with OCR errors and does not contain clear product information such as function, usage, advantages, or application scenarios. Therefore, this section cannot be populated.AttributeValueProduct NameSIU3PUOCSIL0I MOPUIM SIS N0 ...
HRS DF56-50S-0.3V(51)
Product OverviewThe provided text does not contain clear information about product overview, function, usage, advantages, or application scenarios. It appears to be garbled or incomplete technical data.Part NumberDescriptionUnit PriceSJU3PUOCSIL0IMOPUIM SI(BS N0 12103 Ajpuny AUpigena) YSIy PUBLIP ...
