HRS ZE064-2022PCF
Product Overview
The ZE064W Series is a small and waterproof connector designed for automotive and industrial interfaces, particularly in harsh environments. It offers space-saving benefits due to its compact size (0.64mm terminal, 2.2mm pitch) and features high vibration and heat resistance (up to 125). Its IP67/IP69K waterproof rating ensures reliable performance under high-pressure washing conditions. The connector also includes mating keys to prevent mis-mating and a retainer for high contact reliability during cable routing.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Origin: Not specified
- Certifications: IP67, IP69K
- Materials: PA Resin, PBT Resin, Silicone Rubber, Copper Alloy
- Finish: Tin Plating (Contacts)
- Colors: Black or Gray (Housing), Beige (Retainer), Gray (Seal Cover), Rouge (Seals), Brown (Waterproof Cap)
Technical Specifications
| Item | Specifications | Conditions |
| Rated Current | 2A (All pins power supply) / 5A (Single pin power supply) | |
| Operating Temperature | -40 to +125 | (Includes the temperature rise by current flow) |
| Storage Temperature | -10 to +60 | (Note 1: For long-term storage of unused products) |
| Rated Voltage | 60V AC/DC | |
| Storage Humidity Range | Relative humidity 85% or less (no condensation) | (Note 1) |
| Contact Resistance | 8m Max. / 16m Max. | Measured at 1A DC / After durability, vibration, humidity, thermal shock, heat, cold, sulfurous acid, high pressure washing resistance tests |
| Insulation Resistance | 100M Min. | Measured at 500V DC / After high pressure washing resistance test |
| Withstanding Voltage | 1000V AC for 1 min. | There shall be no dielectric breakdown. |
| Mating Durability | 30 mating cycles (insertion/extraction) | No damage, cracks or component breakage. |
| Vibration Resistance | No electrical discontinuity of 7 or more for 1s or more | Frequency: 20 to 200Hz (acceleration: 88m/s2), 3 minutes per cycle (Repeated), 3 directions, 3 hours each. No damage, cracks or component breakage. |
| Lock Strength | 100N Min. | Breaking strength of the lock measured in the direction of the mating axis. |
| Humidity Resistance | Left at 85 for 96 hours with 90 to 95% RH | No damage, cracks or component breakage. |
| Thermal Shock | -40C Room temp 125C Room temp | 30 5 30 5 minutes for 1000 cycles. No damage, cracks or component breakage. |
| Heat Resistance | Left at 140 for 120 hours | No damage, cracks or component breakage. |
| Cold Resistance | Left at -40 for 120 hours | No damage, cracks or component breakage. |
| Sulfurous Acid Resistance | Left unmated in sulfurous acid gas for 96 hours at room temp with 25ppm concentration and 75% RH or higher | No damage, cracks or component breakage. |
| High Pressure Washing Resistance | No water infiltration into panel. | After heating for 120 hours at 120, spray for 30 sec. at 80 and 10MPa at positions 1 through 4. Rotate mounting table at 5r/min. |