Shenzhen ECER Network Technology Co., Ltd.
+86 132 6459 2152

PANASONIC AXK5F80537YG

PANASONIC AXK5F80537YG
Manufacturer:PANASONIC
Model Number:AXK5F80537YG
Minimum Order Quantity:1
Standard Packaging:SMD,P=0.5mm
Delivery Time:1 working day
Product Details
Pitch: 0.5mm
Number Of Rows: 2
Number Of Pins: 80P
Contact Plating: Gold
Mounting Type: Surface Mount,Vertical
Product Description
Detailed Specifications & Features

Notes on Using Narrow Pitch Connectors

Safety Remarks: Observe safety remarks to prevent accidents and injuries. Do not use these connectors beyond the specification sheets. Usage outside of specified rated current, dielectric strength, environmental conditions, etc., may cause circuitry damage via abnormal heating, smoke, and fire. Thorough specification review is appreciated. Contact sales representatives for usage outside specifications. Panasonic Industry Co., Ltd. cannot guarantee quality and reliability for such cases.

Electrical components generally cause failures at a given statistical probability, and durability varies with use environments or conditions. Check actual electrical components under actual conditions before use. Continued usage in a degraded state may lead to deteriorated insulation, resulting in abnormal heat, smoke, or fire. Implement safety designs, periodic maintenance (including redundancy design, fire spread prevention, and malfunction prevention) to prevent injury, death, fire accidents, or social damage.

Design of Devices and PC Board Patterns: When using board-to-board connectors, a pair of boards shall NOT be connected with multiple connectors to avoid misaligned positions, mating failure, or product breakage. Panasonic Industry Co., Ltd. does not guarantee failures caused by using multiple connectors.

Consider mounting equipment positioning errors (up to 0.2 to 0.3 mm). Design PC boards and patterns considering equipment performance. If connectors have positioning tabs, design PC boards with matching positioning holes. Ensure PC board meets recommended pattern design dimensions for required mechanical strength when soldering terminals.

Control cover lay and adhesive thicknesses to prevent poor soldering, as this connector has no stand-off. Minimize cover lay thickness. For narrow pitch series, design means to fix the PC board in place (e.g., with screws and spacers) to prevent it from coming off during vibrations or impacts and to prevent loads from falling directly on soldered portions.

When mounting connectors on an FPC: Solder detachment may occur by force to terminals when the connector soldered to FPC is mated or unmated. Reinforcing plates are recommended on the backside of the FPC where the connector is mounted. The external dimension of the reinforcing plate should be larger than the "Recommended PC board pattern" (approx. 0.5 to 1.0 mm extended on each side). Materials like glass epoxy, polyimide (0.2 to 0.3 mm thick), or SUS (0.1 to 0.2 mm thick) are recommended.

Connectors have a temporary locking structure; mating may separate due to dropping impact depending on FPC size, weight, or bending force. Consider measures to prevent mating separation. Narrow pitch connectors are compact and thin; take care during mating to prevent displacement or angled mating that could damage or deform the connector.

Connector Placement Machine and Mounting Procedures: Select placement machines considering connector height, positioning accuracy, and packaging. Be aware that excessive chucking force may deform the connector body or terminals. External forces during mounting can cause deformations. For some connectors, self-alignment may not be possible; carefully position the terminal with the PC board pattern.

Soldering (Reflow): Measure recommended reflow soldering profile temperature on the PC board near the connector surface or terminals. Screen printing is recommended for cream solder. Refer to specifications for screen opening area and PC board foot pattern area. Do not increase the size of the board pattern and metal mask at the base of the terminals. Avoid too much solder to prevent interference during mating. When mounting on both sides of the PC board with the connector on the underside, use adhesives or other means to fix the connector. Double reflow soldering on the same side is possible.

Solder and flux characteristics vary; consider them and set reflow temperature and oxygen level. Positioning bosses provide approximate alignment; automatic positioning machines are recommended for accurate mounting. In dry conditions, static electricity may cause products to adhere to carrier tape. Recommended humidity is 40-60% RH; use ionizers to remove static electricity.

Do not use resin-containing solder. Use recommended reflow temperature profiles; contact sales for profiles other than those described (e.g., lead-free solder). Profiles are measured on resin-based PC boards; for metal boards or FPC mounting, check for deformation or discoloration before mounting. Contact sales for screen-printing thickness other than recommended.

Soldering (Hand): Tip temperature should be less than 300C (SMD types) or 350C (all products) within 3-5 seconds. Do not allow flux to spread onto connector leads or PC board. Touch the soldering iron to the foot pattern, heat the pattern and terminal, then apply solder wire. Avoid applying load on terminals during soldering. Thoroughly clean the soldering iron. Clean any solder from contact surfaces after soldering. For low profile types, avoid too much solder to prevent mating interference.

Solder Reworking: Finish rework in one operation. Do not use supplementary solder flux for rework of bridges to avoid contact problems. Keep tip temperature below specified limits.

Handling Single Components: Do not drop or allow parts to fall. Excessive force on terminals can cause warping, coming out, or weaken solder adhesion.

Precautions for Mating: To prevent deformation or damage of contacts and molding, mate connectors carefully. Avoid reverse insertion, as it may cause circuitry damage.

Cleaning Flux from PC Board: No need to clean this product. If cleaning, keep solvent clean, prevent contamination of contacts. Pure water-based liquid solvent is recommended as some solvents may dissolve molded parts. Do not insert or remove the connector when not soldered. External pressure on terminals can weaken adherence or cause unevenness.

Brand

Panasonic Industry Co., Ltd.

Product Series

Narrow Pitch Connectors

Application

Board-to-board / Board-to-FPC

Connector Type

Low Profile

Locking Mechanism

Temporary Locking Structure

Specification Details
PC Board Positioning Error Consideration 0.2 to 0.3 mm
Reinforcing Plate for FPC Mounting (Extended Dimension) Approx. 0.5 to 1.0 mm (one side)
Reinforcing Plate Material Options Glass epoxy, Polyimide (0.2-0.3 mm thick), SUS (0.1-0.2 mm thick)
Recommended Humidity for Static Control 40-60% RH
Reflow Soldering Peak Temperature 260C
Reflow Soldering Temperature (Lower Limit) 150C
Reflow Soldering Time (Solder Heat Resistance) 25 sec.
Reflow Soldering Time (Solder Wettability) 70 sec.
Reflow Soldering Time (General) 60-120 sec.
Hand Soldering Iron Temperature (SMD Type) 300C within 5 sec.
Hand Soldering Iron Temperature (All Products) 350C within 3 sec.
Mating Caution Avoid reverse insertion, tilted mating, pressing while not matched.
Message for quick reply
Related Products