SHETIME WAFP2-T1T1-2021-D
Product Overview
This document details the performance and endurance characteristics of a connector product, focusing on various tests to ensure reliability under different environmental and mechanical conditions. The product is designed for applications requiring stable electrical contact and durability.
Technical Specifications
| Item | Test Mode | Requirement | Measurement |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | - | - |
| Contact Resistance | Hfpt A | <30m | <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test, whether to produce discontinuous current (off) | Frequency(35%):10-55-10 Hz/minute Amplitude( #& & ):1.5mm p-p Direction(J7 [A]): 1. Axis of up and down 2. Axis of right the left 3. Axis of front and back Period( /& #):2 hours for each direction G MrREg: 2 /iy | Appearance: No damage Contact Resistance: <30m Current Discontinuity: 1 micro second Max |
| Thermal Aging | Connector combination condition is placed in the oven, high temperature aging test, after the test and measurement of contact resistance | Temperature: 85+ 2 C Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance | More than 100 M | 100M |
| Terminal crimping wire strength | AWG#28 wire, AWG#28 B4 Terminal crimping wires, axial pullout force at a rate of 25 + 3mm per minute | More than 13N | 13N |
| Terminal crimping wire strength | AWG#30 wire, AWG#30 4; Terminal crimping wires, axial pullout force at a rate of 25 + 3mm per minute | More than 8N | 8N |
| Terminal crimping wire strength | AWG#32 wire, AWG#32 S48 Terminal crimping wires, axial pullout force at a rate of 25 + 3mm per minute | More than 6N | 6N |
| Fixed terminals and hole seat | The terminal and the hole seat, at a rate per minute to 25 + 3mm along the wire direction are pulled out from the hole in the seat capacity | Per contact: More than 8N | 8N |
| Single contact insertion force | The Housing together with the terminal ends with Wafer matched, at a rate per minute to 25 = 3mm, inserting force test | Less than 2N | 2N |
| Single contact withdrawal force | The Housing together with the terminal ends with Wafer matched, at a rate per minute to 25 + 3mm, as the pull-out test | More than 0.2N | 0.2N |
| Pin Retention force | Exerts a force on the pin end, at a rate per minute 25 + 3mm, until the needle exit seat pull-out force | Per contact: More than 3N | 3N |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | 5A | - |
| Humidity | Connector combination under the condition of constant temperature and humidity place space, constant temperature and humidity test, after experiment measuring contact resistance, insulation resistance, and withstand voltage test | Temperature: 40 2 C Relative humidity: 90-95%RH Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover |
| Temperature cycling | The combined state of connectors as test samples, thermal shock test, after the test measuring contact resistance, insulation resistance, and resistance to voltage | One cycle consists of: -55+3C, 30min, Room temp. 10-15 min 85 +3C, 30min, Room temp. 10-15 min Total cycle: 5 cycle | Same as paragraph 8.3 |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
