SHETIME WAFP6-T1T1-2021-D
Product Features & Performance
This section details the endurance and performance characteristics of the product through various test modes, ensuring reliability under different environmental and mechanical stresses.
Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test.
No damage.
| Item | Test Mode | Requirement | Measurement |
|---|---|---|---|
| Durability | Mate connectors | Up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test. | - |
| Contact Resistance | Durability Test | <30m | <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test. | Determine if discontinuous current (off) is produced. | During Experiment: No phenomenon. After Experiment: Contact Resistance <30m, Current Discontinuity Max 1 microsecond. |
| Vibration Parameters | - | Frequency: 10-55-10 Hz/minute (35%) Amplitude: 1.5mm p-p (#& &) Direction: Axis of up and down, right the left, front and back (5%) Period: 2 hours for each direction G MrREg: 2 /iy | - |
| Thermal Aging | Connector combination condition is placed in the oven. | Temperature: 85 2 C Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts. | >100 M | - |
| Terminal Crimping Wire Strength | AWG#28 wire, AWG#30 wire, AWG#32 wire. Pullout force test. | AWG#28: >13N AWG#30: >8N AWG#32: >6N | - |
| Fixed Terminals and Hole Seat | Pull out force along the wire direction. | Per contact: >8N | - |
| Single Contact Insertion Force | Housing with terminal ends matched with Wafer. | Less than 2N | - |
| Single Contact Withdrawal Force | Housing with terminal ends matched with Wafer. Pull-out test. | >0.2N | - |
| Pin Retention Force | Force on the pin end until exit from seat. | Per contact: >3N | - |
| Temperature Rise | Mate connector under maximum rated current. | 5L | - |
| Humidity Test | Constant temperature and humidity chamber. | Temperature: 40 2 C Relative Humidity: 90-95%RH Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m Insulation Resistance: >50M Withstand Voltage: No breakdown or flashover |
| Temperature Cycling | Thermal shock test. | One cycle: -55+3C (30min), Room temp. (10-15 min), 85+3C (30min), Room temp. (10-15 min) Total cycles: 5 cycles | Same as paragraph 8.3 (Contact Resistance, Insulation Resistance, Withstand Voltage) |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
