SHETIME WAF08-T1T1-2020-A
Product Overview
This product is designed for various testing scenarios, including durability, environmental resistance, and electrical performance. It is suitable for applications requiring reliable connector performance under stress.
| Test Item | Test Mode | Requirement | Details |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | N/A | Appearance: No damage; Contact Resistance: <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test. | Frequency: 10-55-10 Hz/minute; Amplitude: 1.5mm p-p; Direction: Axis of up and down, right to left, front and back; Period: 2 hours for each direction | Appearance: No damage; Contact Resistance: <30m; Current Discontinuity: Max 1 microsecond |
| Thermal Aging | Connector combination condition is placed in the oven, high temperature aging test. | Temperature: 85 2C; Period: 96 hours continuously | Appearance: No damage; Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts. | > 100 M | N/A |
| Terminal crimping wire strength | AWG#28 wire, AWG#30 wire, AWG#32 wire. Terminal crimping wires, axial pullout force. | AWG#28: > 13N; AWG#30: > 8N; AWG#32: > 6N | Rate of 25 3mm per minute |
| Fixed terminals and hole seat | The terminal and the hole seat, pulled out from the hole in the seat capacity. | Per contact: > 8N | Rate of 25 3mm along the wire direction per minute |
| Single contact insertion force | Housing with terminal ends matched with Wafer, inserting force test. | < 2N | Rate of 25 3mm per minute |
| Single contact withdrawal force | Housing with terminal ends matched with Wafer, pull-out test. | > 0.2N | Rate of 25 3mm per minute |
| Pin Retention force | Exerts a force on the pin end until the needle exits the seat. | Per contact: > 3N | Rate of 25 3mm per minute |
| Temperature Rise | Mate connector measures temperature rise of contact when maximum rated current is passed. | 51C (Max) | N/A |
| Humidity | Connector combination under constant temperature and humidity conditions. | Temperature: 40 2C; Relative humidity: 90-95%RH; Period: 96 hours continuously | Appearance: No damage; Contact Resistance: <30m; Insulation Resistance: 50M; Withstand Voltage: No breakdown or flashover |
| Temperature Cycling | Connectors undergo thermal shock test. | One cycle: -55+3C (30min) -> Room temp (10-15 min) -> 85+3C (30min) -> Room temp (10-15 min). Total 5 cycles. | Contact Resistance, Insulation Resistance, and Withstand Voltage: Same as paragraph 8.3 |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
