Shenzhen ECER Network Technology Co., Ltd.
+86 132 6459 2152

PANASONIC AXK5F24347YG

PANASONIC AXK5F24347YG
Manufacturer:PANASONIC
Model Number:AXK5F24347YG
Minimum Order Quantity:10
Standard Packaging:SMD,P=0.5mm
Delivery Time:4-6 working days
Product Details
Pitch: 0.5mm
Number Of Rows: 2
Number Of Pins: 24P
Contact Plating: Gold
Mounting Type: Surface Mount,Vertical
Product Description
Detailed Specifications & Features

Safety Remarks for Narrow Pitch Connectors

To prevent accidents and injuries, it is crucial to use these connectors strictly within their specified limits. Exceeding rated current, dielectric strength, or environmental conditions can lead to abnormal heating, smoke, and fire, potentially causing circuitry damage. Thorough specification review is appreciated. For usage outside of specifications, please contact a sales representative. Panasonic Industry Co., Ltd. cannot guarantee quality and reliability for such cases.

Electrical components generally have a statistical probability of failure, and durability varies with use environments. Always check actual electrical components and devices under actual conditions before use. Continued usage in a degraded state can lead to deteriorated insulation, abnormal heat, smoke, or fire. Implement safety designs, including redundancy, fire spread prevention, and malfunction prevention, to avoid injury, death, or social damage resulting from product failure or end-of-life.

Design Considerations for Devices and PC Board Patterns

  • When using board-to-board connectors, do not connect a pair of boards with multiple connectors to avoid mating failure or product breakage due to misaligned positions.
  • Account for potential positioning errors (up to 0.2-0.3 mm) from mounting equipment when designing PC boards and patterns.
  • If connectors have positioning tabs, ensure the PC board is designed with matching positioning holes.
  • To ensure mechanical strength during soldering, adhere to recommended PC board pattern design dimensions.
  • Minimize the thickness of cover lay and adhesive to prevent poor soldering, as these connectors lack stand-offs.
  • For narrow pitch series connectors, design means to fix the PC board in place (e.g., with screws and spacers) to prevent detachment during vibrations or impacts and to protect soldered portions.

Mounting Connectors on an FPC

  • To prevent solder detachment from FPC terminals during mating/unmating, attach a reinforcing plate to the backside of the FPC where the connector is mounted. The plate should extend approximately 0.5-1.0 mm beyond the recommended PC board pattern dimensions. Recommended materials include glass epoxy or polyimide (0.2-0.3 mm thickness) or SUS (0.1-0.2 mm thickness).
  • Due to the temporary locking structure, FPC connectors may separate upon dropping impact. Consider measures to prevent mating separation.
  • Handle narrow pitch connectors with care during mating to prevent damage or deformation, as they are designed for compactness and thinness. Avoid displacement or angled mating.

Connector Placement Machine and Mounting Procedures

  • Select placement machines considering connector height, positioning accuracy, and packaging.
  • Avoid excessive chucking force from placement machines, which can deform connector bodies or terminals.
  • Be aware that external forces during mounting can deform contact surfaces and terminals.
  • For larger connectors where self-alignment may be insufficient, carefully position terminals with PC board patterns.

Soldering

Reflow Soldering

  • Measure recommended reflow soldering profile temperatures with a sensor on the PC board near the connector. Refer to specifications for product-specific settings.
  • Screen printing is recommended for cream solder. Refer to specifications for recommended PC board patterns and metal mask window sizes. Avoid increasing the size of board patterns and metal masks at terminal bases.
  • Do not use too much solder, as it can cause mating interference.
  • For connectors mounted on the underside of a double-sided PC board, use adhesives or other means to secure them. Double reflow soldering on the same side is possible.
  • Consider solder/flux characteristics and set reflow temperature and oxygen levels accordingly.
  • Positioning bosses offer approximate alignment; use automatic positioning machines for accurate mounting.
  • In dry conditions, static electricity can cause products to adhere to carrier tape. Maintain 40-60% RH and use ionizers.
  • Do not use resin-containing solder to prevent fixed contacts.

Hand Soldering

  • Soldering iron tip temperature should be less than 300C for 5 seconds or 350C for 3 seconds for SMD type connectors.
  • Prevent flux from spreading onto connector leads or the PC board to avoid flux rising into the connector.
  • Heat the foot pattern and connector terminal before applying solder wire to the end of the terminals.
  • Avoid applying load on connector terminals during soldering.
  • Thoroughly clean the soldering iron.
  • After soldering, carefully check and clean any solder from contact surfaces.
  • For low-profile connectors, avoid excessive solder to prevent mating interference.

Solder Reworking

  • Complete rework in one operation.
  • Do not use supplementary solder flux for rework to avoid contact problems.
  • Keep soldering iron tip temperature below the specified limits.

Handling Single Components

  • Prevent dropping or falling of parts.
  • Handle with care to avoid warping, detachment, or weakening of solder adhesion on terminals.

Precautions for Mating

  • Take care to prevent deformation or damage to contacts and molding during mating. Avoid mating as shown in diagrams (e.g., pressing while inlets are not matched, strongly pressed and twisted, tilted mating).
  • Avoid reverse insertion of symmetrical connectors, which can cause circuitry damage.

Cleaning Flux from PC Board

  • No cleaning is generally required. If cleaning is necessary:
  • Do not insert or remove the connector when not soldered to prevent terminal adherence issues.
  • Keep cleaning solvent clean and prevent contamination of connector contacts.
  • Use pure water-based liquid solvents, as some strong solvents may dissolve molded parts.

Brand

Panasonic Industry Co., Ltd.

Product Series

Narrow Pitch Connectors / High Current Connectors

Application

Board-to-Board / Board-to-FPC

Certifications

Not specified

Material (Reinforcing Plate for FPC)

Glass epoxy, Polyimide, SUS
Specification Details
PC Board Thickness Consideration For cover lay and adhesive, minimize thickness to prevent poor soldering.
PC Board Fixing for Vibration/Impact Design means to fix PC board (e.g., screws, spacers) to prevent detachment and load on soldered portions.
Reinforcing Plate for FPC Mounting Recommended: Larger than "Recommended PC board pattern" (0.5-1.0 mm extension). Materials: Glass epoxy/Polyimide (0.2-0.3 mm thick) or SUS (0.1-0.2 mm thick).
Connector Handling (FPC) Consider measures to prevent mating separation due to dropping impact.
Placement Machine Chucking Force Avoid excessive force to prevent deformation of connector body or terminals.
Reflow Soldering Temperature Profile Refer to product specifications. Typical profile: 260C Peak, 180C Upper Limit, 150C Solder Heat Resistance (max 25 sec), 60-120 sec (Solder Wettability), 70 sec (Lower Limit).
Screen Printing for Cream Solder Refer to specifications for recommended PC board pattern and metal mask window size.
Hand Soldering Temperature (SMD) Max 300C within 5 sec or 350C within 3 sec.
Solder Reworking Tip Temperature Keep below specified limits (Table A).
Mating Precautions Avoid pressing while inlets are not matched, strongly pressed and twisted, or tilted mating. Avoid reverse insertion.
Cleaning Solvents Pure water-based liquid solvents recommended. Avoid strong solvents that may dissolve molded parts.
Message for quick reply
Related Products