SHETIME WAFA4-T1T1-2021-D
Product Overview
This product offers robust performance characteristics suitable for various demanding applications. It has undergone rigorous testing to ensure reliability and durability.
Technical Specifications
| Test Item | Test Mode | Requirement | Result |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | N/A | N/A |
| Contact Resistance | Hfpt A | <30m | <30m |
| Vibration | Frequency: 10-55-10 Hz/minute (35%) Amplitude: 1.5mm p-p Direction: Axis of up and down, right to left, front and back Period: 2 hours for each direction | Discontinuous current: Max 1 microsecond Contact resistance: <30m Appearance: No damage | BIR AW 1 usec Max Bl <30 m SR TodRids |
| Thermal Aging | Temperature: 85 2 C Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m | ShAL: AR FEAHE<30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | >100 M | Z100MQ |
| Terminal crimping wire strength (AWG#28 wire) | Axial pullout force at a rate of 25 3mm per minute | >13N | 213N |
| Terminal crimping wire strength (AWG#30 wire) | Axial pullout force at a rate of 25 3mm per minute | >8N | =8N |
| Terminal crimping wire strength (AWG#32 wire) | Axial pullout force at a rate of 25 3mm per minute | >6N | =Z6N |
| Fixed terminals and hole seat | Pulled out from the hole in the seat capacity at a rate of 25 3mm per minute along the wire direction | Per contact: >8N | B =8N |
| Single contact insertion force | Housing together with terminal ends matched with wafer, inserting force test at a rate of 25 3mm per minute | Less than 2N | =2N |
| Single contact withdrawal force | Housing together with terminal ends matched with wafer, pull-out test at a rate of 25 3mm per minute | >0.2N | =20.2N |
| Pin Retention force | Force exerted on the pin end until needle exits seat, pull-out force at a rate of 25 3mm per minute | Per contact: >3N | B i 23N |
| Temperature Rise | Connector measure temperature rise of contact when maximum rated current is passed | 5L | N/A |
| Humidity | Constant temperature and humidity: 40 2 C, 90-95% RH for 96 hours | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover | Sh: T B <30m HLHEIE: =50MQ T t T A |
| Temperature Cycling | One cycle: -55+3C (30min) -> Room temp. (10-15 min) -> 85+3C (30min) -> Room temp. (10-15 min). Total 5 cycles. | Same as paragraph 8.3 | M 8.3 & |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
