SHETIME WAF05-T1T1-2020-D
Product Overview
This document outlines the test modes and requirements for a connector, focusing on its durability, electrical performance, and mechanical integrity under various environmental conditions. It details tests such as Durability, Contact Resistance, Vibration, Thermal Aging, Insulation Resistance, Mechanical Performance (Terminal crimping wire strength, Fixed terminals and hole seat, Single contact insertion/withdrawal force, Pin Retention force), Temperature Rise, Humidity, and Temperature Cycling.
Technical Specifications
| Item | Test Mode | Requirement | Description |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test | - | - |
| Contact Resistance | - | <30m | - |
| Vibration | Frequency(35%):10-55-10 Hz/minute Amplitude( #& & ):1.5mm p-p Direction(J7 [A]): 1. Axis of up and down N 2. Axis of right the left 4 45 % 3. Axis of front and back i 5 # Period( /& #):2 hours for each direction | Appearance: No damage Contact Resistance: <30m Current Discontinuity: 1 micro second Max | - |
| Thermal Aging | Temperature:85+ 2 C Period:96 hours continuously | Appearance: No damage Contact Resistance: <30m | - |
| Insulation Resistance | Apply 500V DC(rms)for 1 minute between adjacent contacts | >100 M | - |
| Terminal crimping wire strength | AWG#28 wire: pullout force AWG#30 wire: pullout force AWG#32 wire: pullout force | >13N >8N >6N | - |
| Fixed terminals and hole seat | Pull out force test | >8N per contact | - |
| Single contact insertion force | Wafer matched insertion force test | <2N | - |
| Single contact withdrawal force | Wafer matched pull-out test | >0.2N | - |
| Pin Retention force | Pin pull-out force test | >3N per contact | - |
| Temperature Rise | Measure temperature rise of contact when maximum rated current is passed | 5L | - |
| Humidity | Temperature: 40 2 C Relative humidity: 90-95%RH Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover | - |
| Temperature Cycling | One cycle consists of: -55+3C, 30min, Room temp. 10-15 min 85 +3C, 30min, Room temp. 10-15 min Total cycle: 5 cycle | Same as paragraph 8.3 | - |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
