JUSHUO GH125-S06DCA-00
Product Acknowledgement
This document serves as a product acknowledgement for the 1.25mm pitch horizontal surface mount connector with latch (GH125-S**DCA-00).
Product Name: 1.25mm (1.25mm Horizontal Mount Connector with Latch)
Product Model: GH125-S**DCA-00
Version: 1 (Version 1)
Page: 2 of 8
Company: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Customer
Not specified
Material Number
GH125-S**DCA-00
Company Address
Not specified
Contact Person
(Xing Kunxin), (Liu Zhonghua), (Wang Bin)
Phone
Not specified
Fax
Not specified
Not specified
| Item | Specification | Requirement |
|---|---|---|
| Rated Voltage | 50V AC/DC | |
| Rated Current | 1.0A | |
| Operating Temperature Range | -2585 | |
| Operating Humidity Range | Below 90% RH | |
| Environmental Protection | Products comply with ROHS environmental protection requirements. | |
| Packing | Inner packing is joint and several, outer packing is carton. Product is sealed in the box, do not shake. | |
| Transport Environment Temperature | -20 to +50 | |
| Storage Environment Temperature | -20 to +50, Relative humidity not more than 90%, no acid, alkaline, or other corrosive gases. | |
| Part Name | Model | Material |
|---|---|---|
| Base | GH | LCP E130i |
| Pin | GH | Phosphor copper |
| Stator | GH | Phosphor copper |
| Number | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 9.1 | Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20m Max |
| 9.2 | Insulation Resistance | Apply 100V DC between adjacent contacts and between contacts and enclosure for 1 minute. | 500M Min |
| 9.3 | Withstand Voltage | Apply 500V AC between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| 10.1 | Heating Test | Place plugged connector in +852 environment for 96H, then test after 1-2H in normal environment. | Appearance: No damage. Contact Resistance: 60m Max. |
| 10.2 | Cold Tolerance Test | Place plugged connector in -252 environment for 96H, then test after 1-2H in normal environment. | Appearance: No damage. Contact Resistance: 60m Max. |
| 10.3 | Moisture Resistance Test | Place plugged connector in 402, 90-96% RH environment for 96H, then test after 1-2H in normal environment. | Appearance: No damage. Insulation Resistance: 60M Min. Withstand Voltage: 250V AC/minute MIN. |
| 10.4 | Temperature Cycle | Cycle between -25 (30min), room temp (1H), +85 (30min), room temp (1H) for 5 cycles. Test after 2H recovery. | Appearance: No abnormality. Contact Resistance: 60m Max. |
| 10.5 | Salt Spray Test | Continuous spray with 51% NaCl solution for 24H. Wash and recover for 1-2H. | Appearance: No damage or corrosion. Contact Resistance: 60m Max. |
| 10.6 | Weldability | Dip weldable part in 2605 tin solution for 2.50.5 seconds. | Tin coverage area 95% |
| 10.7 | Soldering Resistance | Place connector on PCB and test via 2605 reflow or wave soldering for 51S. | 1. Plastic parts: No obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. |
| 11.1 | Pin Fixing Force | Fix pin holder, apply force at 253mm/min until pin withdraws. | Single pin: 5N Min |
| 11.2 | Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min along conductor direction. | Single terminal: 7N Min |
| 11.3 | Mechanical Life | Plug and unplug 30 times at 10 times/min without power. | Contact Resistance: 80m Max |
| 11.4 | Terminal Crimp Wire Strength | Axial pullout force at 253mm/min. | 26AWG wire: 17.8N. 28AWG wire: 8.9N. 30AWG wire: 4.4N. 32AWG wire: 2.2N. |
| 11.5 | Insertion/Pull-out Force | Fit socket and terminal, test insertion/removal on the same axis (remove socket lock). Test speed: 205mm/min. | Insertion force: 2N (Per pin). Pull-out force: 0.3N (Per pin). |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
