SHETIME WAFP3-T1T1-2021-D
Product Overview
This product is designed for durability and reliability in various applications. It undergoes rigorous testing to ensure its performance under demanding conditions.
Applications:
- Environmental testing
- Vibration resistance
- Thermal aging
- Humidity resistance
- Temperature cycling
| Item | Test Mode | Requirement | Measurement |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | 30 cycles | Not Specified |
| Contact Resistance | Hfpt A | <30m | <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test | Discontinuous current (off) phenomenon, after the experiment contact resistance | Frequency: 10-55-10 Hz/minute (35%) Amplitude: 1.5mm p-p (#& &) Direction: Axis of up and down, right the left, front and back Period: 2 hours for each direction G MrREg: 2 /iy |
| Appearance | Vibration Test | No damage | No damage |
| Contact Resistance | Vibration Test | <30m | <30m |
| Current Discontinuity | Vibration Test | 1 micro second Max | 1 usec Max |
| Thermal Aging | Connector combination condition is placed in the oven | Temperature: 85+ 2 C Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | > 100 M | > 100 M |
| Terminal crimping wire strength | AWG#28 wire, AWG#28 B4 | > 13N | > 13N |
| Terminal crimping wire strength | AWG#30 wire, AWG#30 4; | > 8N | > 8N |
| Terminal crimping wire strength | AWG#32 wire, AWG#32 48 | > 6N | > 6N |
| Fixed terminals and hole seat | The terminal and the hole seat, pulled out from the hole in the seat capacity | > 8N per contact | > 8N |
| Single contact insertion force | Housing with terminal ends matched with Wafer, inserting force test | < 2N | < 2N |
| Single contact withdrawal force | Housing with terminal ends matched with Wafer, pull-out test | > 0.2N | > 0.2N |
| Pin Retention force | Exerts a force on the pin end, until the needle exit seat pull-out force | > 3N per contact | > 3N |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | 5L | Not Specified |
| Humidity | Connector combination under constant temperature and humidity conditions | Temperature: 40 2 C Relative humidity: 90-95%RH Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover |
| Temperature Cycling | Thermal shock test | One cycle consists of: -55+3C, 30min, Room temp. 10-15 min 85 +3C, 30min, Room temp. 10-15 min Total cycle: 5 cycles | Same as paragraph 8.3 |
HRS DF56C-26S-0.3V(51)
Product InformationThis document appears to be a label or part of a manual for a product. The text is largely unreadable due to image quality or formatting. No specific product overview, advantages, or application scenarios can be extracted.Part NumberModelDateSIU3PUOCSIL0IMOPUIM SI(BS N0 121032023...
HRS DF36A-25S-0.4V(51)
Product OverviewThe DF36 Series is a 0.4mm pitch, vertical mating, micro-coaxial cable connector designed for high-density applications. It offers a reliable connection solution for micro-coaxial cables, featuring space-saving configurations suitable for modern electronic devices.Brand: Hirose ...
HRS DF56C-30S-0.3V(51)
Product OverviewThe provided text appears to be a scanned document with OCR errors and does not contain clear product information such as function, usage, advantages, or application scenarios. Therefore, this section cannot be populated.AttributeValueProduct NameSIU3PUOCSIL0I MOPUIM SIS N0 ...
HRS DF56-50S-0.3V(51)
Product OverviewThe provided text does not contain clear information about product overview, function, usage, advantages, or application scenarios. It appears to be garbled or incomplete technical data.Part NumberDescriptionUnit PriceSJU3PUOCSIL0IMOPUIM SI(BS N0 12103 Ajpuny AUpigena) YSIy PUBLIP ...
