<
>
SHETIME WAFP4-T1T1-2020-D
SHETIME WAFP4-T1T1-2020-D
Manufacturer:SHETIME
Model Number:WAFP4-T1T1-2020-D
Minimum Order Quantity:1500
Standard Packaging:SMD,P=1.25mm
Delivery Time:3-5 working days
Product Details
Y-Width Of Bottom Edge On Board:
4.27mm
Pins Structure:
1x4P
Contact Material:
Copper Alloy
Color:
Maize-yellow
Flame Retardant Rating:
UL94V-0
Number Of Rows:
1
Supplementary Features:
Auxiliary Solder Pin
Mounting Type:
Surface Mount,Vertical
Pitch:
1.25mm
Number Of PINs:
4P
Operating Temperature:
-25℃~+85℃
Number Of PINs Per Row:
4
Current Rating:
1A
Contact Plating:
Tin
Voltage Rating (Max):
125V
X-Length Of Bottom Edge On Board (Spacing Line):
9.7mm
Row Spacing:
1.25mm
Z-Height Of The Board:
4.75mm
Product Description
Detailed Specifications & Features
Product Overview
This product series appears to be a connector designed for various environmental and mechanical stresses, suitable for applications requiring high reliability and durability. It undergoes rigorous testing to ensure performance under demanding conditions.
Brand
N/A
Origin
N/A
Material
N/A
Certifications
N/A
| Item | Test Mode | Requirement | Test Details |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | N/A | N/A |
| Contact Resistance | N/A | <= 30m | Hfpt A <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test | Discontinuous current (off) phenomenon, after the experiment contact resistance | Frequency: 10-55-10 Hz/minute (35%) Amplitude: 1.5mm p-p (#& &) Direction: Axis of up and down, right to left, front and back (J7 [A]) Period: 2 hours for each direction |
| Appearance (Post-Vibration) | N/A | No damage | SR TodRids |
| Contact Resistance (Post-Vibration) | N/A | <= 30m | Bl <30 m |
| Current Discontinuity (Post-Vibration) | N/A | Max 1 microsecond | BIR AW 1 usec Max |
| Thermal Aging | Connector combination condition is placed in the oven, high temperature aging test | Contact resistance | Temperature: 85 2 C Period: 96 hours continuously (W 8522 C, A FEE 96 /T) |
| Appearance (Post-Thermal Aging) | N/A | No damage | ShAL: AR |
| Contact Resistance (Post-Thermal Aging) | N/A | <= 30m | FEAHE<30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | > 100 M | Z100MQ |
| Terminal Crimping Wire Strength (AWG#28) | Axial pullout force | > 13N | 213N |
| Terminal Crimping Wire Strength (AWG#30) | Axial pullout force | > 8N | =8N |
| Terminal Crimping Wire Strength (AWG#32) | Axial pullout force | > 6N | =Z6N |
| Fixed Terminals and Hole Seat | Terminal and hole seat pulled out from the hole in the seat capacity | > 8N per contact | =8N |
| Single Contact Insertion Force | Housing with terminal ends matched with Wafer, insertion force test | < 2N | =2N |
| Single Contact Withdrawal Force | Housing with terminal ends matched with Wafer, pull-out test | > 0.2N | =20.2N |
| Pin Retention Force | Force exerted on pin end until exit from seat | > 3N per contact | 23N |
| Temperature Rise | Mate connector measure temperature rise of contact when maximum rated current is passed | 5L (Specific value not detailed) | N/A |
| Humidity Test | Connector combination under constant temperature and humidity conditions | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover | Temperature: 40 2 C Relative Humidity: 90-95% RH Period: 96 hours continuously (RE40+2C, S :90-95%, JEHA: FrEE 96 /N) |
| Temperature Cycling | Connector combination as test samples, thermal shock test | Contact resistance, insulation resistance, and resistance to voltage (Same as paragraph 8.3) | One cycle: -55+3C (30min) -> Room temp. (10-15 min) -> 85+3C (30min) -> Room temp. (10-15 min) Total cycles: 5 (TERR S 5K) |
Message for quick reply
Related Products