<
>
SHETIME WAFA5-T1T1-2020-D
SHETIME WAFA5-T1T1-2020-D
Manufacturer:SHETIME
Model Number:WAFA5-T1T1-2020-D
Minimum Order Quantity:1500
Standard Packaging:SMD,P=1.25mm
Delivery Time:3-5 working days
Product Details
Y-Width Of Bottom Edge On Board:
4.27mm
Pins Structure:
1x5P
Contact Material:
Copper Alloy
Color:
White
Flame Retardant Rating:
UL94V-0
Number Of Rows:
1
Supplementary Features:
Auxiliary Solder Pin
Mounting Type:
Surface Mount,Vertical
Pitch:
1.25mm
Operating Temperature:
-25℃~+85℃
Number Of PINs:
5P
Number Of PINs Per Row:
5
Current Rating:
1A
Contact Plating:
Tin
Voltage Rating (Max):
125V
X-Length Of Bottom Edge On Board (Spacing Line):
10.95mm
Row Spacing:
1.25mm
Z-Height Of The Board:
4.75mm
Product Description
Detailed Specifications & Features
Product Features & Performance
This section details the performance characteristics and test results of the product, focusing on durability, electrical properties, and environmental resistance. These tests ensure the product's reliability under various operating conditions.
Durability Up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test.
Contact Resistance (Initial) <30m
Contact Resistance (After Vibration) <30m
Current Discontinuity (After Vibration) Max 1 microsecond
Appearance (After Vibration) No damage
Appearance (After Thermal Aging) No damage
Contact Resistance (After Thermal Aging) <30m
Appearance (After Humidity Test) No damage
Contact Resistance (After Humidity Test) <30m
Insulation Resistance (After Humidity Test) 50M
Withstand Voltage (After Humidity Test) No breakdown or flashover
Contact Resistance (After Temperature Cycling) Same as paragraph 8.3
Insulation Resistance (After Temperature Cycling) Same as paragraph 8.3
Withstand Voltage (After Temperature Cycling) Same as paragraph 8.3
| Item | Test Mode | Requirement | Details |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles | Rate of 10 cycles per minute prior to environmental test. | |
| Contact Resistance | <30m | ||
| Vibration | Connector combination state | Frequency: 10-55-10 Hz/minute (35% sweep). Amplitude: 1.5mm p-p. Direction: Axis of up/down, right/left, front/back (5% tolerance). Period: 2 hours for each direction. | |
| Contact Resistance: <30m | |||
| Current Discontinuity: Max 1 microsecond | |||
| Appearance: No damage | |||
| Thermal Aging | Connector combination condition | Temperature: 85 2C. Period: 96 hours continuously. | |
| Appearance: No damage | |||
| Contact Resistance: <30m | |||
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | 100 M | |
| Terminal crimping wire strength | AWG#28 wire | 13N | Axial pullout force at a rate of 25 3mm per minute. |
| AWG#30 wire | 8N | Axial pullout force at a rate of 25 3mm per minute. | |
| AWG#32 wire | 6N | Axial pullout force at a rate of 25 3mm per minute. | |
| Fixed terminals and hole seat | 8N per contact | Terminal and hole seat pulled out from the hole at a rate of 25 3mm per minute along the wire direction. | |
| Single contact insertion force | Housing with terminal ends matched with Wafer | 2N | Inserting force test at a rate of 25 3mm per minute. |
| Single contact withdrawal force | Housing with terminal ends matched with Wafer | 0.2N | Pull-out test at a rate of 25 3mm per minute. |
| Pin Retention force | 3N per contact | Force exerted on the pin end until exit from the seat at a rate of 25 3mm per minute. | |
| Temperature Rise | Mate connector | 5L | Measure temperature rise of contact when maximum rated current is passed. |
| Humidity | Connector combination under constant temperature and humidity | Temperature: 40 2C. Relative humidity: 90-95% RH. Period: 96 hours continuously. | |
| Contact Resistance: <30m | |||
| Insulation Resistance: 50M | |||
| Withstand Voltage: No breakdown or flashover | |||
| Temperature cycling | Combined state of connectors | One cycle: -55+3C (30min) -> Room temp (10-15 min) -> 85+3C (30min) -> Room temp (10-15 min). Total cycles: 5. | |
| Contact Resistance: Same as paragraph 8.3 | |||
| Insulation Resistance: Same as paragraph 8.3 | |||
| Resistance to voltage: Same as paragraph 8.3 |
Message for quick reply
Related Products