<
>
SHETIME WAFA8-T1T1-2021-D
SHETIME WAFA8-T1T1-2021-D
Manufacturer:SHETIME
Model Number:WAFA8-T1T1-2021-D
Minimum Order Quantity:2000
Standard Packaging:SMD,P=1.25mm,Surface Mount,Right Angle
Delivery Time:3-5 working days
Product Details
Y-Width Of Bottom Edge On Board:
5.45mm
Pins Structure:
1x8P
Contact Material:
Copper Alloy
Color:
White
Flame Retardant Rating:
UL94V-0
Number Of Rows:
1
Supplementary Features:
Auxiliary Solder Pin
Mounting Type:
Surface Mount, Right Angle
Pitch:
1.25mm
Number Of PINs:
8P
Operating Temperature:
-25℃~+85℃
Number Of PINs Per Row:
8
Current Rating:
1A
Contact Plating:
Tin
X-Length Of Bottom Edge On Board (Spacing Line):
14.7mm
Voltage Rating (Max):
125V
Row Spacing:
1.25mm
Z-Height Of The Board:
3.45mm
Product Description
Detailed Specifications & Features
Product Overview
This product offers robust performance characteristics suitable for various demanding applications. Its design ensures reliable operation under environmental stresses and mechanical loads.
Brand Not Specified
Origin Not Specified
Material Not Specified
Color Not Specified
Certifications Not Specified
| Item | Test Mode | Requirement | Specification |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | N/A | N/A |
| Contact Resistance | N/A | <30m | <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test, whether to produce discontinuous current (off) | Frequency(35%): 10-55-10 Hz/minute, Amplitude(1.5mm p-p), Direction: Axis of up and down, right the left, front and back, Period: 2 hours for each direction | Appearance: No damage, Contact Resistance: <30m, Current Discontinuity: 1 micro second Max |
| Endurance Characteristics | N/A | N/A | N/A |
| Thermal Aging | Connector combination condition is placed in the oven, high temperature aging test | Temperature: 852C, Period: 96 hours continuously | Appearance: No damage, Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | >100 M | >100 M |
| Terminal crimping wire strength | AWG#28 wire pullout force | >13N | >13N |
| Terminal crimping wire strength | AWG#30 wire pullout force | >8N | >8N |
| Terminal crimping wire strength | AWG#32 wire pullout force | >6N | >6N |
| Fixed terminals and hole seat | Terminal and hole seat pullout force | >8N per contact | >8N |
| Single contact insertion force | Housing with terminal ends matched with wafer, insertion force test | <2N | <2N |
| Single contact withdrawal force | Housing with terminal ends matched with wafer, pull-out test | >0.2N | >0.2N |
| Pin Retention force | Force on pin end until exit seat pull-out force | >3N per contact | >3N |
| Temperature Rise | Mate connector measure temperature rise of contact when maximum rated current is passed | 5A | N/A |
| Humidity | Connector combination under constant temperature and humidity, insulation test, contact resistance, resistance and withstand voltage test | Temperature: 402C, Relative humidity: 90-95%RH, Period: 96 hours continuously | Appearance: No damage, Contact Resistance: <30m, Insulation Resistance: 50M, Withstand Voltage: No breakdown or flashover |
| Temperature cycling | Combined state of connectors, thermal shock test, measuring contact resistance, insulation resistance, and resistance to voltage | One cycle: -55+3C (30min) -> Room temp. (10-15 min) -> 85+3C (30min) -> Room temp. (10-15 min). Total cycle: 5 cycles. | Same as paragraph 8.3 (Contact Resistance: <30m, Insulation Resistance: 50M) |
Message for quick reply
Related Products