SHETIME WAFA2-T1T1-2020-D
Product Overview
This product undergoes rigorous testing to ensure its durability, performance, and reliability under various environmental and mechanical conditions. Key tests include Durability, Contact Resistance, Vibration, Thermal Aging, Insulation Resistance, Mechanical Performance (Terminal Crimping, Fixed Terminals, Insertion/Withdrawal Forces, Pin Retention), Temperature Rise, Humidity, and Temperature Cycling.
Brand
N/A
Origin
N/A
Material
N/A
Color
N/A
Certifications
N/A
Package Types
N/A
| Test Item | Test Mode | Requirement | Specification |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | N/A | N/A |
| Contact Resistance | N/A | <30m | <30m |
| Vibration | Connector combination state of the welding circuit board as test samples, resistance to vibration test, whether to produce discontinuous current (off) | Frequency: 10-55-10 Hz/minute Amplitude: 1.5mm p-p Direction: Axis of up and down, right to left, front and back Period: 2 hours for each direction | Appearance: No damage Contact Resistance: <30m Current Discontinuity: 1 micro second Max |
| Thermal Aging | Connector combination condition is placed in the oven, high temperature aging test | Temperature: 85 2 C Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | > 100 M | > 100 M |
| Terminal crimping wire strength (AWG#28 wire) | Axial pullout force | > 13N | > 13N |
| Terminal crimping wire strength (AWG#30 wire) | Axial pullout force | > 8N | > 8N |
| Terminal crimping wire strength (AWG#32 wire) | Axial pullout force | > 6N | > 6N |
| Fixed terminals and hole seat | Pull out from the hole in the seat capacity | > 8N (Per contact) | > 8N (Per contact) |
| Single contact insertion force | Housing with terminal ends matched with Wafer, inserting force test | < 2N | < 2N |
| Single contact withdrawal force | Housing with terminal ends matched with Wafer, pull-out test | > 0.2N | > 0.2N |
| Pin Retention force | Force on the pin end until needle exit seat pull-out force | > 3N (Per contact) | > 3N (Per contact) |
| Temperature Rise | Mate connector measure temperature rise of contact when maximum rated current is passed | 5A | N/A |
| Humidity | Connector combination under constant temperature and humidity place space | Temperature: 40 2 C Relative humidity: 90-95%RH Period: 96 hours continuously | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover |
| Temperature Cycling | Thermal shock test | One cycle: -553C (30min), Room temp. (10-15 min), 85 3C (30min), Room temp. (10-15 min) Total cycles: 5 cycles | Same as paragraph 8.3 (Contact Resistance, Insulation Resistance, Withstand Voltage) |