<
>
SHETIME WAFP5-T1T1-2021-D
SHETIME WAFP5-T1T1-2021-D
Manufacturer:SHETIME
Model Number:WAFP5-T1T1-2021-D
Minimum Order Quantity:2000
Standard Packaging:SMD,P=1.25mm,Surface Mount,Right Angle
Delivery Time:3-5 working days
Product Details
Y-Width Of Bottom Edge On Board:
5.45mm
Pins Structure:
1x5P
Contact Material:
Copper Alloy
Color:
Maize-yellow
Flame Retardant Rating:
UL94V-0
Number Of Rows:
1
Supplementary Features:
Auxiliary Solder Pin
Mounting Type:
Surface Mount, Right Angle
Pitch:
1.25mm
Operating Temperature:
-25℃~+85℃
Number Of PINs:
5P
Number Of PINs Per Row:
5
Current Rating:
1A
Contact Plating:
Tin
Voltage Rating (Max):
125V
X-Length Of Bottom Edge On Board (Spacing Line):
10.95mm
Row Spacing:
1.25mm
Z-Height Of The Board:
3.45mm
Product Description
Detailed Specifications & Features
Product Overview
This section details the endurance and environmental testing of the product, ensuring its reliability under various conditions. It covers durability, contact resistance, vibration, thermal aging, insulation resistance, mechanical performance, temperature rise, humidity, and temperature cycling tests.
Technical Specifications
| Item | Test Mode | Requirement | Value |
|---|---|---|---|
| Durability | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | - | - |
| Contact Resistance | Hfpt A | <30m | - |
| Vibration | Frequency: 10-55-10 Hz/minute (35%) Amplitude: 1.5mm p-p Direction: Axis of up and down, Axis of right the left, Axis of front and back Period: 2 hours for each direction | Connector combination state of the welding circuit board as test samples, resistance to vibration test, whether to produce discontinuous current (off) | Appearance: No damage Contact Resistance: <30m Current Discontinuity: Max 1 microsecond |
| Thermal Aging | Temperature: 85 2 C Period: 96 hours continuously | Connector combination condition is placed in the oven, high temperature aging test, measurement of contact resistance | Appearance: No damage Contact Resistance: <30m |
| Insulation Resistance | Apply 500V DC (rms) for 1 minute between adjacent contacts | - | >100 M |
| Terminal crimping wire strength | AWG#28 wire, AWG#30 wire, AWG#32 wire | Axial pullout force | AWG#28: >13N AWG#30: >8N AWG#32: >6N |
| Fixed terminals and hole seat | Axial pullout force along the wire direction | - | >8N per contact |
| Single contact insertion force | Housing with terminal ends matched with Wafer, rate 25 3mm per minute | - | <2N |
| Single contact withdrawal force | Housing with terminal ends matched with Wafer, rate 25 3mm per minute | - | >0.2N |
| Pin Retention force | Force on the pin end, rate 25 3mm per minute | - | >3N per contact |
| Temperature Rise | Mate connector, maximum rated current | - | 5L |
| Humidity | Temperature: 40 2 C Relative humidity: 90-95%RH Period: 96 hours continuously | Connector combination under constant temperature and humidity, insulation test, measurement of contact resistance, resistance and withstand voltage test | Appearance: No damage Contact Resistance: <30m Insulation Resistance: 50M Withstand Voltage: No breakdown or flashover |
| Temperature Cycling | One cycle: -553C (30min), Room temp. (10-15 min); 85 3C (30min), Room temp. (10-15 min) Total cycle: 5 cycles | Thermal shock test, measurement of contact resistance, insulation resistance, and resistance to voltage | Same as paragraph 8.3 |
Message for quick reply
Related Products