<
>
SHETIME PHB10-00F1-2200-A
SHETIME PHB10-00F1-2200-A
Manufacturer:SHETIME
Model Number:PHB10-00F1-2200-A
Minimum Order Quantity:500
Standard Packaging:Through Hole,P=2mm
Delivery Time:3-5 working days
Product Details
Y-Width Of Bottom Edge On Board:
7.3mm
Pins Structure:
2x5P
Contact Material:
PA6T;Copper Alloy
Color:
White
Flame Retardant Rating:
UL94V-0
Number Of Rows:
2
Mounting Type:
Through Hole
Pitch:
2mm
Operating Temperature:
-25℃~+85℃
Number Of PINs:
10P
Number Of PINs Per Row:
5
Contact Plating:
Gold
Current Rating:
3A
Voltage Rating (Max):
250V
X-Length Of Bottom Edge On Board (Spacing Line):
14mm
Z-Height Of The Board:
10.3mm
Row Spacing:
2mm
Product Description
Detailed Specifications & Features
Mechanical Performance
The following tests evaluate the mechanical integrity and performance of the product's components under various conditions.
Terminal Crimping Wire Strength
AWG#22 wire: > 50N
AWG#24 wire: > 30N
AWG#26 wire: > 20N
AWG#28 wire: > 13N
Terminal Retention Force
> 15N
Single Contact Insertion Force
< 6N
Single Contact Withdrawal Force
> 0.5N
Pin Retention Force
> 15N
Durability
30 cycles
| Item | Test Mode | Requirement |
|---|---|---|
| Terminal crimping wires, axial pullout force | AWG#22 wire, 25 ± 3mm rate per minute | > 50N |
| Terminal crimping wires, axial pullout force | AWG#24 wire, 25 ± 3mm rate per minute | > 30N |
| Terminal crimping wires, axial pullout force | AWG#26 wire, 25 ± 3mm rate per minute | > 20N |
| Terminal crimping wires, axial pullout force | AWG#28 wire, 25 ± 3mm rate per minute | > 13N |
| Fixed terminals from the hole in the seat capacity and hole seat | 25 ± 3mm rate per minute | > 15N |
| Single contact inserting force | Wafer matched, 25 ± 3mm rate per minute | < 6N |
| Single contact withdrawal force | Wafer matched, 25 ± 3mm rate per minute | > 0.5N |
| Pin Retention force | Exerts a force on the pin end, 25 ± 3mm rate per minute | > 15N |
| Contact Resistance | Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test | < 30mΩ |
| Item | Test Mode | Requirement | Conditions |
|---|---|---|---|
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed | N/A | N/A |
| Humidity | Connector combination under constant temperature and humidity | Appearance: No damage Contact Resistance: < 30mΩ Insulation Resistance: ≥ 500M Ω Withstand Voltage: No breakdown or flashover | Temperature: 40 ± 2 °C Relative humidity: 90-95%RH Period: 96 hours continuously |
| Temperature Cycling | Thermal shock test on combined connectors | Same as paragraph 8.3 | One cycle: -55 ± 3 °C (30 min), Room temp. (10-15 min), 85 ± 3 °C (30 min), Room temp. (10-15 min) Total cycles: 5 |
| Vibration | Connector combination state of welding circuit board | Appearance: No damage Contact Resistance: < 30mΩ Current Discontinuity: 1 micro second Max | Frequency: 10-55-10 Hz/minute Amplitude: 1.5mm p-p Directions: X, Y, Z axes Period: 2 hours for each direction |
| Thermal Aging | Connector combination placed in oven | Appearance: No damage Contact Resistance: < 30mΩ | Temperature: 85 ± 2 °C Period: 96 hours continuously |
Message for quick reply
Related Products