<
>
JUSHUO AFC10-S02PCA-00
JUSHUO AFC10-S02PCA-00
Manufacturer:JUSHUO
Model Number:AFC10-S02PCA-00
Minimum Order Quantity:1
Standard Packaging:SMD,P=1mm
Delivery Time:1 working day
Product Details
Y-Width Of Bottom Edge On Board:
3.76mm
Pins Structure:
1x2P
Reference Series:
SH
Contact Plating:
Tin
Contact Material:
Phosphor Bronze;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
2
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
4.3mm
Z-Height Of The Board:
4.4mm
Mounting Type:
Surface Mount,Vertical
Product Description
Detailed Specifications & Features
Product Acknowledgement
Product Name: 1.0mm (1.0mm Vertical SMT Connector)
Product Model: AFC10-S**PCA-00 (** indicates PIN count)
Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Version: 1 1 version
Page: 2 of 8
This document serves as a product acknowledgement for the AFC10-S**PCA-00 connector series, detailing its specifications, performance, and environmental characteristics.
Company: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Address: N/A
Contact Person: (Liu Zhonghua), (Wang Bin), (Xing Kunxin)
Phone: N/A
Fax: N/A
Email: N/A
| Item | Specification | Unit |
|---|---|---|
| Rated Voltage | 50 | V AC/DC |
| Rated Current | 0.5 | A |
| Operating Temperature Range | -25 to +105 | |
| Operating Humidity Range | Below 90 | % RH |
| Part Name | Model | Material |
|---|---|---|
| Base | 1.0 LCP E130i | LCP |
| Spring Piece | 1.0 | Phosphor Copper |
| Fixing Piece | 1.0 | Phosphor Copper |
| Number | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 9.1 | Contact Resistance | Plug in the connector and test with a contact resistance meter. | 20 m Max |
| 9.2 | Insulation Resistance | Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | 100 M Min |
| 9.3 | Withstand Voltage | Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. | No breakdown and flashover |
| Number | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 10.1 | Heating Test | Place plug connector in +1052 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 30 m Max. |
| 10.2 | Cold Tolerance Test | Place plug connector in -252 environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Contact Resistance: 30 m Max. |
| 10.3 | Moisture Resistance Test | Place plug connector in 402, 90-96% RH environment for 96H, then in normal environment for 1-2H. | Appearance: No damage. Insulation Resistance: 50 M Min. Withstand Voltage: 200 VAC/min. |
| 10.4 | Temperature Cycle | 5 cycles of -25 (30min) -> Room Temp (1H) -> +105 (30min) -> Room Temp (1H). Recover for 2H. | Appearance: No abnormalities. Contact Resistance: 30 m Max. |
| 10.5 | Salt Spray Test | Continuous spray with 5% NaCl solution for 24H. Wash with distilled water, recover for 1-2H. | Appearance: No damage, corrosion. Contact Resistance: 30 m Max. |
| 10.6 | Weldability | Dip in 2355 tin solution for 2.50.5 seconds. | Tin coverage: 95% or more. |
| 10.7 | Soldering Resistance | Subject to 2605 reflow or wave soldering for 51S on PCB. | 1. Plastic parts: No obvious deformation, damage, blistering. 2. Electrical characteristics must meet specifications. |
| Number | Project | Test Method | Performance Requirement | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 11.1 | PIN Fixing Force | Apply force at the front end of the pin at 253mm/min until withdrawal. | Single PIN: 7 N Min. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.2 | Terminal Retention in Plastic Parts | Pull terminal from socket at 253mm/min along conductor direction. | Single Terminal: 5 N Min. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.3 | Mechanical Life | Plug and unplug 50 times at 10 times/min without power. | Contact Resistance: 30 m Max. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.4 | Insert Force/Draw Force | (1) Match socket and terminal, test insertion/withdrawal on the same axis (speed: 205mm/min), remove lock during test. (2) Performance Requirements table follows. |
|
Message for quick reply
Related Products