hanxia HX PZ2.54-2x2P TP
Product Overview
This specification covers production and inspection of Connectors.
Use Condition
Ambient temperature Range: -40C to +105C
Applicable Wire Sizes
AWG 7
Applicable PC Board Thickness
1.2~1.6 mm
Appearance
Product surface without defect, dirt, crack and mechanical damage. Contact without rust, plating not oxidized and not peeled.
Dimension
According to drawings
Exchangable
Exchangable with same specification products.
| Type | Material | Finish | Thickness/Gauge | Color | UL Rating | RoHS Compliant |
|---|---|---|---|---|---|---|
| Terminal Contact | Phosphor bronze | Tin Plating | 3~4 m | |||
| Housing | Nylon66 | White | UL94V-0 | |||
| Contact | Phosphor bronze | Tin Plating | 0.15 mm, 3~4 m | |||
| Wafer | Nylon46 | 0.30 mm | Beige | UL94V-0 | ||
| Contact | Phosphor bronze | Gold Plating | 3~4 m | RoHS Compliant | ||
| Wafer | Nylon46 | 0.30 mm | Beige | UL94V-0 | ||
| Housing | PBT | White | UL94V-0 | |||
| Contact | Phosphor bronze | Tin Plating | 3~4 m | |||
| Wafer | Nylon46 | 0.30 mm | Beige | UL94V-0 | ||
| Solder tabs | Phosphor bronze | Tin Plating | 3~4 m | |||
| Wafer | Nylon46 | 0.25 mm | Beige | UL94V-0 |
| Item | Requirement |
|---|---|
| Voltage Rated | 250V AC/DC |
| Current Rated | 3A AC/DC |
| Contact Resistance | <0.02 |
| Insulation Resistance | 1000 M |
| Dielectric Strength | 1000V AC/minute |
| Item | Requirement |
|---|---|
| Male contact Retention force | 10N per pin |
| Female contact Retention force | 10N per pin |
| Plug-in force | <3N per pin |
| Plug-out force | 0.5N per pin |
| Item | Requirement |
|---|---|
| Soldering resistance | Time: 2.50.5s, Temperature: 2605C, Area of Soldering: 95% |
Packaging, Transportation & Storage
Packaging: Plastic inner is a plastic bag, inner terminal is panel mounting attach material packing, marked with product name, specification model, quantity, date of production. Exterior package is carton, facing the packing list, marked with product name, specification model, quantity, date of dispatch. The product in the box must not rock.
Transportation: Allow for any way transportation, cannot get wet and mechanical injury.
Storage: The connector in finished packing should be stored in ambient temperature between -10C to +40C, Relative humidity 80%. Store in a warehouse that does not have acidic, alkaline air and other corrosive gases in the ambient air.