<
>
JUSHUO AFC08-S04QCA-00
JUSHUO AFC08-S04QCA-00
Manufacturer:JUSHUO
Model Number:AFC08-S04QCA-00
Minimum Order Quantity:5
Standard Packaging:SMD,P=0.8mm
Delivery Time:1 working day
Product Details
Y-Width Of Bottom Edge On Board:
2.82mm
Flame Retardant Rating:
UL94V-0
Pins Structure:
1x4P
Contact Plating:
Tin
Contact Material:
Phosphor Bronze;LCP
Pitch:
0.8mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
5.5mm
Z-Height Of The Board:
1.85mm
Mounting Type:
Surface Mount, Right Angle
Operating Temperature:
-25℃~+85℃
Product Description
Detailed Specifications & Features
Product Acknowledgement
This document serves as a product acknowledgement for the 0.8mm Pitch Horizontal SMT Connector, model AFC08-S**QCA-00.
Customer: [Customer Name]
Product Name: 0.8mm Pitch Horizontal SMT Connector
Material Number: AFC08-S**QCA-00 (** indicates PIN count)
Company: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
Date: 2019.08.11
Technical Specifications
| Item | Specification | Requirement |
|---|---|---|
| Scope of Application | 0.8 Series Products | Applicable to A1251 series products. |
| Standard Rating: Rated Voltage | 50V | |
| Standard Rating: Rated Current | 0.5A AC/DC | |
| Standard Rating: Operating Temperature Range | -2585 | |
| Standard Rating: Operating Humidity Range | Below 90% RH | |
| Environmental Protection | Products comply with ROHS environmental protection requirements. | |
| Packing | Inner packing is connected, outer packing is carton. Products are sealed in the box without shaking. | |
| Transport | Allowed by any means, avoid rain, snow, sunlight, collision, extrusion. Ambient temperature: -20 to +50. | |
| Storage | Ambient temperature: -20 to +50, relative humidity not more than 90%. Warehouse should be free of acid, alkaline, and other corrosive gases. | |
| Part Name: Base | Model: 0.8 LCP E130i | Material: LCP |
| Part Name: Pin | Model: 0.8 | Material: Phosphor copper |
| Part Name: Stator | Model: 0.8 | Material: Phosphor copper |
| Appearance | Plastic parts: no obvious scars, color difference, cracks, burrs, flash, material shortage, or deformation affecting use. Metal parts: smooth surface, no rust, oxidation, peeling, blackening, or obvious mechanical damage. | |
| Size | Refer to engineering drawing. | |
Electrical Characteristics
| No. | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 9.1 | Contact Resistance | Connect the connector and test with a contact resistance meter. Measure between two terminals of the connector to form a closed loop. | 20m Max |
| 9.2 | Insulation Resistance | Connect the connector and apply 500V DC voltage between adjacent contacts and between contacts and the enclosure for 1 minute. | 100M Min |
| 9.3 | Withstand Voltage | Connect the connector and apply 500V AC voltage between adjacent contacts and between contacts and the enclosure for 1 minute. | No breakdown or flashover. |
Environmental Characteristics
| No. | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 10.1 | Heating Test | Place the mated connector in an environment of +1052 for 96H. Remove and place in a normal environment for 1~2H before testing. | Appearance: No damage. Contact Resistance: 30m Max. |
| 10.2 | Cold Tolerance Test | Place the mated connector in an environment of -252 for 96H. Remove and place in a normal environment for 1~2H before testing. | Appearance: No damage. Contact Resistance: 30m Max. |
| 10.3 | Moisture Resistance Test | Place the mated connector in an environment of 402 and 90~96% RH for 96H. After the test, remove and place in a normal environment for 1~2H before testing. | Appearance: No damage. Insulation Resistance: 50M Min. Withstand Voltage: 300V AC/minute MIN. |
| 10.4 | Temperature Cycle | Place test samples in a high and low temperature test chamber. Steps: a. -253 for 30 min. b. Room temperature for 1H. c. +1053 for 30 min. d. Room temperature for 1H. Repeat 5 cycles. Recover in normal environment for 2H before inspection. | Appearance: No abnormalities. Contact Resistance: 30m Max. |
| 10.5 | Salt Spray Test | Suspend test samples in a test chamber. Spray continuously for 24H with a (51)% NaCl solution. After testing, gently wash off surface deposits with flowing distilled water. Recover at normal temperature for 1~2H before inspection. | Appearance: No damage or corrosion. (Hardware should not have serious corrosion exposing base metal; pre-plated material is allowed slight corrosion on blanking surface that does not affect performance). Contact Resistance: 30m Max. |
| 10.6 | Weldability | Dip the part to be welded of the test sample into 2455 tin solution and hold for 2.50.5 seconds. | Tin coverage area: 95% or more. |
| 10.7 | Soldering Resistance | Place the connector on a PCB and test using 2605 reflow soldering or wave soldering for 51S. | 1. Plastic parts shall be free from obvious deformation, damage, or blistering. 2. Electrical characteristics must meet specifications. |
Mechanical Characteristics
| No. | Project | Test Method | Performance Requirement |
|---|---|---|---|
| 11.1 | Pin Fixing Force | Fix the pin holder on the drawing machine and apply force on the pin front end at a rate of 253mm/min until the pin is withdrawn from the holder. | Single pin: 5N Min. |
| 11.2 | Terminal Retention in Plastic Parts | Match the terminal with the socket hole. Pull the terminal from the socket hole at a rate of 253mm/min along the wire direction. | Single terminal: 5N Min. |
| 11.3 | Mechanical Life | Under no power condition, plug and unplug 30 times at a speed of 10 times/min. | Contact Resistance: 30m Max. |
| 11.4 | Insertion/Extraction Force | Test Method: (1) Fit the socket and terminal, and conduct insertion/removal test on the same axis with the needle seat. Remove the socket lock during testing (test speed: 205mm/min). | Performance Requirements: |
| Position | Insertion (N) | Pull out (N) | |||
| 1 | 3.00 | 0.50 | |||
| 2 | 8.00 | 2.00 | |||
| 3 | 11.00 | 2.50 | |||
| 4 | 14.00 | 3.00 | |||
| 5 | 17.00 | 3.50 | |||
| 6 | 20.00 | 4.00 | |||
| 7 | 23.00 | 4.50 | |||
| 8 | 26.00 | 5.00 | |||
| 9 | 29.00 | 5.50 | |||
| 10 | 32.00 | 6.00 | |||
| 11 | 35.00 | 6.50 | |||
| 12 | 38.00 | 7.00 | |||
| 13 | 41.00 | 7.50 | |||
| 14 | 44.00 | 8.00 | |||
| 15 | 47.00 | 8.50 | |||
| 16 | 50.00 | 9.00 |
Message for quick reply
Related Products