<
>
JUSHUO AFC10-S04PCA-00
JUSHUO AFC10-S04PCA-00
Manufacturer:JUSHUO
Model Number:AFC10-S04PCA-00
Minimum Order Quantity:5
Standard Packaging:SMD,P=1mm
Delivery Time:1 working day
Product Details
Y-Width Of Bottom Edge On Board:
3.76mm
Reference Series:
SH
Pins Structure:
1x4P
Contact Plating:
Tin
Contact Material:
Phosphor Bronze;LCP
Operating Temperature:
-25℃~+85℃
Flame Retardant Rating:
UL94V-0
Pitch:
1mm
Voltage Rating (Max):
50V
Number Of PINs Per Row:
4
Number Of Rows:
1
X-Length Of Bottom Edge On Board (Spacing Line):
6.3mm
Z-Height Of The Board:
4.4mm
Mounting Type:
Surface Mount,Vertical
Product Description
Detailed Specifications & Features
Product Acknowledgement
Product Name: 1.0mm (1.0mm Vertical SMT Connector)
Product Model: AFC10-S**PCA-00 (** indicates PIN count)
Brand: (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Version: 1 (1 version)
Company Address (SHENZHEN JUSHUO ELECTRONIC CO.,LTD)
Contact Person (Liu Zhonghua), (Wang Bin), (Xing Kunxin)
Phone N/A
Fax N/A
Email N/A
| Item | Specifications | Unit | Requirement |
|---|---|---|---|
| Rated Voltage | 50 | V | N/A |
| Rated Current | 0.5 | A (AC/DC) | N/A |
| Operating Temperature Range | -25 to +105 | N/A | |
| Operating Humidity Range | Below 90% | Relative Humidity | N/A |
| Environmental Protection | Products in line with ROHS environmental protection requirements. | ||
| Packing | Inner packing is joint and several, outer packing is carton, product is sealed in the box, do not shake. | ||
| Transport Environment Temperature | -20 to +50 | N/A | |
| Storage Environment Temperature | -20 to +50 | Relative humidity not more than 90%, no acid, alkaline and other corrosive gases. | |
| Part Name | Model | Material |
|---|---|---|
| Base | 1.0 LCP E130i | LCP E130i |
| Contact Spring | 1.0 | Phosphor copper |
| Stator | 1.0 | Phosphor copper |
| Number | Project | Test Method | Performance Requirement | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 9.1 | Contact Resistance | Plug in the connector and test it with a contact resistance meter to measure both terminals of the connector. Form a closed loop between. | 20m Max | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 9.2 | Insulation Resistance | Plug in the connector and apply 500V DC voltage between the adjacent contacts and between the contacts and the enclosure for 1 minute. | 100M Min | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 9.3 | Withstand Voltage | Plug in the connector and apply 500V AC voltage between the adjacent contacts and between the contacts and the enclosure for 1 minute. | No breakdown and flashover | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.1 | Heating Test | Put the plug connector in the environment of +1052 for 96H, take it out and put it in the normal environment for 12H before testing. | Appearance: no damage; Contact resistance: 30m Max | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.2 | Cold Tolerance Test | The plug connector was placed in the environment with the temperature of -252 for 96H, and was taken out and placed in the normal environment for 12H before being tested. | Appearance: no damage; Contact resistance: 30m Max | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.3 | Moisture Resistance Test | Place the plug connector in an environment with a temperature of 402 and relative humidity of 9096%. Last for 96H, after the test, take it out and put it in the normal environment for 12H before the test. | Appearance: no damage; Insulation resistance: 50M Min; Withstand voltage: 200VAC/min | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.4 | Temperature Cycle | Put the test samples into the high and low temperature test chamber, and adjust the temperature according to the following steps: a. Place for 30 minutes under the constant temperature of -253 B. Place at room temperature for 1 hour C. Place for 30 minutes at a constant temperature of +1053 D. Place at room temperature for 1 hour From a to d is a cycle period, a total of 5 cycles are carried out, and 2H is recovered in the normal environment. Check later. | Appearance: no abnormality; Contact resistance: 30m Max | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.5 | Salt Spray Test | Suspend the test sample from the top of the test chamber with a concentration of (5 1)% of Sodium Chloride Solution, continuous spray 24H, after test, with flowing steaming water gently. Wash away the precipitates on the surface, recover for 1 ~ 2H under normal temperature, and then check and measure. | Appearance: no damage or corrosion (Hardware should have no exposed bottom metal severe corrosion: use pre-plating well. The profile, the blanking surface is allowed to have slight corrosion that does not affect its performance.); Contact resistance: 30m Max | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.6 | Weldability | Dip the welded part of the test sample into 2355 tin solution and hold 2.50.5 seconds. | Tin area above 95% | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 10.7 | Soldering Resistance | Place the connector on the PCB, and then reflow the product through 2605 or wave soldering for 51s. | 1. Plastic parts shall be free from obvious deformation, damage and blistering. 2. The electrical characteristics must meet the specifications. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.1 | Pin Fixing Force | Fix the pin holder on the drawing machine and apply force on the front end of the pin at a rate of 253mm per minute until the pin is withdrawn from the pin holder. | Single pin 7N Min | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.2 | Terminal Retention in Plastic Parts | The terminal shall be matched with the hole seat, and at the rate of 253mm per minute along the conductor direction, the force that the terminal is pulled out of the socket. | Single terminal: 5N Min | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.3 | Mechanical Life | Under no power on state, plug and unplug 50 times at the speed of 10 times / min. | Contact resistance: 30m Max | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 11.4 | Insert Force/Draw Force | (1) The hole seat and the terminal should be well matched, and the pin seat should be inserted on the same axis for the test. The hole seat should be locked during the test Remove (test speed: 205mm/minute (2) Performance requirements: |
|
Message for quick reply
Related Products