SUMITOMO 8100-3455
Introduction
Safety, amenity, and functionality, measure the essential performance of an automobile and these predominately depend on in-vehicle electronic controls. A variety of car electronic devices are systematically connected with each other using automotive connectors, and the connectors for this purpose are required to be smaller, lighter, and provide direct connection and advanced performance. At Sumitomo Wiring Systems, we are actively researching and developing components, including terminals and housings, with respect to the total wiring system, using our experience as an all-round automotive wiring harness manufacturer. This is how we are able to achieve high reliability for our products. In addition, we are searching for the optimum wiring system and layout, using as little space for wiring as is effectively possible. These are part of our activities to provide services that will further satisfy our customers, and we sincerely ask to be favored with your request for connectors made by Sumitomo Wiring Systems.
Features
The TS connector series has a mechanism of terminal position assurance. This series consists of 0.64mm, 1.5mm, 2.3mm, 4.8mm and 8.0mm types classi ed according to terminal size, covering an extensive array of applications from signal to power circuits.
- The connector mechanism only allows the retainer to be set when the terminal is completely inserted.
- Retainers are pre-mounted on connector housings, and are structured to enable setting by the same simple operation regardless of the number of ways, improving operability.
- These connectors can be directly secured to a support on the car body.
- PCB models are also available for connection to printed circuit boards.
- RoHS/ELV Compliant
TS 0.64mm1.5mm2.3mm 4.8mm8.0mm
- PCB
- RoHS ELV
Brand
Sumitomo Wiring Systems
Origin
Japan (implied by manufacturer)
Certifications
RoHS/ELV Compliant
| Connector Series | Terminal Tab Size | No. of Way Variation | Applicable Cable Size (mm) | Page | Contact Resistance (m max.) | Leak Current (mA max.) | Insulation Resistance (M min.) | Seal | Material (Housing/Terminal/Wire Seal) |
|---|---|---|---|---|---|---|---|---|---|
| TS (unsealed) | 0.64 (025) | 2, 5, 10, 14, 16, 19, 22, 24, 28, 32, 36, 40 | 0.13 - 0.5 | A-02 | 8 (initial) / 16 (after durability) | 3 | 100 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |
| TS (unsealed) | 1.5 (060) | 2, 4, 8, 12 | 0.13 - 2.0 | A-07 | 3 (initial) / 10 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||
| TS (unsealed) | 2.3 (090) | 2, 6, 8, 9, 10, 11, 12, 13, 16, 20 | 0.22 - 2.0 | A-10 | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| TS (unsealed) | 4.8 (187) | 1, 2, 3, 4, 6, 8, 10 | 0.3 - 3.0 | A-14 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| TS (unsealed) | 8.0 (312) | 1, 2, 3, 4 | 0.5 - 8.0 | A-18 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| TS (unsealed) Hybrid | 0.64+1.5 | 12, 18, 20 | A-20 | 8 (initial) / 16 (after durability) | HousingPBT, SPS, TerminalBrass | ||||
| TS (unsealed) Hybrid | 0.64+2.3 | 17, 18, 20 | A-21 | 3 (initial) / 10 (after durability) | HousingPBT, SPS, TerminalBrass | ||||
| TS (unsealed) Hybrid | 0.64+4.8 | 20 | A-22 | HousingPBT, SPS, TerminalBrass | |||||
| TS (unsealed) Hybrid | 2.3+4.8 | 14, 15, 20 | A-22 | 3 (initial) / 10 (after durability) | HousingPBT, SPS, TerminalBrass | ||||
| TS (unsealed) PCB | 0.64 | 16, 33, 36, 56, 60, 68 | A-24 | 8 (initial) / 16 (after durability) | HousingPBT, SPS, TerminalBrass | ||||
| TS (unsealed) Hybrid | 0.64+1.5 | 20 | A-26 | 8 (initial) / 16 (after durability) | HousingLCP, TerminalBrass | ||||
| HE (unsealed) | 0.64 (025) | 2, 3, 4, 6, 7, 10, 12, 16, 20, 24, 34 | 0.22 - 0.75 | C-02 | 5 (initial) / 10 (after durability) | 1 | 100 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |
| HE (unsealed) | 1.0 (040) | 2, 5, 6, 8, 13, 17, 21 | 0.22 - 0.85 | C-06 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| HE (unsealed) | 2.3 (090) | 2, 3, 4, 5, 6, 8, 10, 14, 16, 20 | 0.3 - 2.0 | C-09 | 3 (initial) / 6 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||
| HE (unsealed) | 4.8 (187) | 2, 4, 5 | 0.3 - 3.0 | C-12 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| HE (unsealed) | 9.5 (375) | 1, 2 | 2.0 - 10.0 | C-14 | 2 (initial) / 4 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||
| HE (unsealed) Hybrid | 0.64+2.3 | 12, 13, 18, 20, 23, 28 | C-16 | 5 (initial) / 10 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| HE (unsealed) Hybrid | 1.0+2.3 | 9, 10, 14, 23 | C-18 | 3 (initial) / 6 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| HE (unsealed) Hybrid | 1.0+4.8 | 12, 14 | C-19 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||||
| HE (unsealed) Hybrid | 2.3+4.8 | 8, 14, 16, 18, 20 | C-20 | 3 (initial) / 6 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| HE (unsealed) Hybrid | 4.8+8.0 | 6 | C-21 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||||
| HE (unsealed) PCB | 1.0 | 13 | C-22 | 5 (initial) / 10 (after durability) | HousingPBTG30, TerminalBrass | ||||
| HE (unsealed) Hybrid | 1.0+2.3 | 23 | C-22 | 3 (initial) / 6 (after durability) | HousingPBTG30, TerminalBrass | ||||
| HE (unsealed) Hybrid | 1.0+4.8 | 14 | C-23 | HousingPBTG30, TerminalBrass | |||||
| HE (unsealed) | 2.3 | 6 | C-23 | 3 (initial) / 6 (after durability) | HousingPBTG30, TerminalBrass | ||||
| NH (unsealed) | 0.64 (025) | 3, 4, 8, 10, 12, 16, 24, 32, 40 | 0.22 - 0.75 | F-02 | 10 (initial) / 30 (after durability) | 1 | 100 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |
| NH (unsealed) Hybrid | 0.64+2.3 | 20 | F-07 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||||
| SL (unsealed) | 1.5 (060) | 4, 12, 14, 16 | 0.3 - 2.0 | I-02 | 3 (initial) / 10 (after durability) | 3 | 100 | HousingPBT, TerminalHeat-Resistant Copper Alloy | |
| SL (unsealed) | 2.3 (090) | 2, 4, 6, 12, 14, 16, 18 | 0.3 - 2.0 | I-05 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| SL (unsealed) | 2.8 (110) | 4 | 0.3 - 3.0 | I-08 | HousingPBT, TerminalHeat-Resistant Copper Alloy | ||||
| SL (unsealed) Hybrid | 1.5+2.8 | 14 | I-10 | HousingPBT, TerminalHeat-Resistant Copper Alloy | |||||
| DL (unsealed) | 0.64 (025) | 2 | 0.22 - 0.75 | K-02 | 5 (initial) / 10 (after durability) | 3 | 100 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |
| DL (unsealed) | 1.0 (040) | 4, 8, 12, 16, 20 | 0.3 - 1.25 | K-04 | 3 (initial) / 10 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | |||
| DL (unsealed) | 2.3 (090) | 2, 4, 6, 10, 14, 16 | 0.3 - 2.0 | K-07 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy | ||||
| TS (sealed) | 0.64 (025) | 2, 3, 4, 5, 6, 8, 10, 12, 13, 15, 17, 20, 30 | 0.13 - 0.5 | B-02 | 8 (initial) / 16 (after durability) | 50A | 100 | 50kPa (initial) / 30kPa (after durability) | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon |
| TS (sealed) | 0.64W (025W) | 4 | 0.3 - 0.6 | B-08 | 100A | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||
| TS (sealed) Hybrid | 0.64W+2.3+4.8 | 38, 46 | B-10 | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||||
| TS (sealed) | 2.3 (090) | 2, 3, 4, 5, 6, 7 | 0.3 - 2.0 | B-12 | 3 (initial) / 10 (after durability) | 100A | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | ||
| TS (sealed) | 4.8 (187) | 1, 2, 3 | 0.3 - 3.0 | B-19 | 100A | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||
| TS (sealed) | 8.0 (312) | 1, 2 | 0.5 - 8.0 | B-23 | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | ||||
| TS (sealed) Hybrid | 0.64+2.3 | 10, 13, 26 | B-26 | 8 (initial) / 16 (after durability) | 50A | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||
| TS (sealed) Hybrid | 0.64+4.8 | 4, 24, 34, 40, 46 | B-27 | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||||
| TS (sealed) Hybrid | 0.64+2.3+4.8 | 42, 52 | B-28 | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||||
| TS (sealed) Hybrid | 2.3+4.8 | 4, 5, 6, 11 | B-29 | 3 (initial) / 10 (after durability) | 100A | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||
| TS (sealed) Hybrid | 4.8+8.0 | 3 | B-30 | HousingPBT, PA6T, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||||
| HV/HVG (sealed) | 1.0 (040) | 2, 3, 4, 5, 6, 10 | 0.3 - 1.25 | D-02 | 5 (initial) / 10 (after durability) | 100A | 100 | 98kPa (initial) / 49kPa (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon |
| HX (sealed) | 1.0 (040) | 1, 2, 3, 5, 6, 7 | 0.3 - 1.25 | E-02 | 5 (initial) / 10 (after durability) | 100A | 100 | 98kPa (initial) / 49kPa (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon |
| HX (sealed) Joint Connector | 1.0 (040) | 23 | E-06 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||||
| HX (sealed) Joint Connector | 23 | E-08 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | ||||||
| HX (sealed) Hybrid Joint Connector | 0.64+1.0 | 22 | E-10 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | |||||
| HX (sealed) | 1.5 (060) | 2, 3, 4, 8, 12 | 0.13 - 2.0 | E-13 | 3 (initial) / 6 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon, NBR | |||
| HX (sealed) | 2.3 (090) | 1, 2, 3, 4 | 0.3 - 2.0 | E-17 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon, NBR | ||||
| HX (sealed) Hybrid | 1.0+4.8 | 13 | E-21 | 5 (initial) / 10 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon, NBR | ||||
| HX (sealed) Hybrid | 1.5+4.8 | 4, 5 | E-21 | 3 (initial) / 6 (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon, NBR | ||||
| HX (sealed) Hybrid | 2.3+4.8 | 10 | E-22 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon, NBR | |||||
| RS (sealed) | 2.3 (090) | 1, 2, 3, 4, 5, 6, 8 | 0.3 - 2.0 | G-02 | 3 (initial) / 10 (after durability) | 10A | 100 | 98kPa (initial) / 98kPa (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon |
| TL (sealed) | 2.3 (090) | 1, 2, 4, 5 | 0.3 - 2.0 | H-02 | 5 (initial) / 10 (after durability) | 50A | 100 | 98kPa (initial) / 98kPa (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon |
| SL (sealed) | 1.5 (060) | 2, 3, 14 | 0.3 - 2.0 | J-02 | 3 (initial) / 10 (after durability) | 100A | 100 | 49.0kPa (initial) / 29.4kPa (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon |
| SL (sealed) | 2.3 (090) | 1, 2, 3, 4, 6 | 0.3 - 2.0 | J-06 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | ||||
| SL (sealed) | 8.0 (312) | 2 | 2.0 - 8.0 | J-09 | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealSilicon | ||||
| DL (sealed) | 2.3 (090) | 1, 2, 3, 4, 6, 8, 10, 12, 16 | 0.3 - 2.0 | L-02 | 3 (initial) / 10 (after durability) | 100A | 100 | 49.0kPa (initial) / 29.4kPa (after durability) | HousingPBT, TerminalBrass, Heat-Resistant Copper Alloy, Wire SealNBR |