Shenzhen ECER Network Technology Co., Ltd.
+86 132 6459 2152

JUSHUO AFC10-S10PCA-00

JUSHUO AFC10-S10PCA-00
Manufacturer:JUSHUO
Model Number:AFC10-S10PCA-00
Minimum Order Quantity:5
Standard Packaging:SMD,P=1mm
Delivery Time:1 working day
Product Details
Y-Width Of Bottom Edge On Board: 3.76mm
Pins Structure: 1x10P
Reference Series: SH
Contact Plating: Tin
Contact Material: Phosphor Bronze;LCP
Operating Temperature: -25℃~+85℃
Flame Retardant Rating: UL94V-0
Pitch: 1mm
Voltage Rating (Max): 50V
Number Of PINs Per Row: 10
Number Of Rows: 1
X-Length Of Bottom Edge On Board (Spacing Line): 12.3mm
Z-Height Of The Board: 4.4mm
Mounting Type: Surface Mount,Vertical
Product Description
Detailed Specifications & Features

Product Overview

This product acknowledgment document details the 1.0mm pitch vertical SMT connector, model AFC10-S**PCA-00, manufactured by SHENZHEN JUSHUO ELECTRONIC CO.,LTD. It outlines the product's specifications, testing procedures, and performance requirements, ensuring compliance with industry standards and customer confirmation.

Product Attributes

  • Brand: SHENZHEN JUSHUO ELECTRONIC CO.,LTD
  • Product Name: 1.0mm pitch vertical SMT connector
  • Product Model: AFC10-S**PCA-00
  • Version: 1 1 version
  • Certifications: ROHS environmental protection requirements
  • Origin: Shenzhen, China

Technical Specifications

Item Specifications Test Method Performance Requirement
2. Standard Rating
Rated Voltage 50V
Rated Current 0.5A AC/DC
Operating Temperature Range -25+105
Operating Humidity Range Relative humidity is below 90%
7. Part Name/Material
Part Name Model Material
Base 1.0 LCP E130i
Reed 1.0 Phosphor copper
Stator 1.0 Phosphor copper
9. Electrical Characteristics
Contact Resistance Plug in the connector and test with a contact resistance meter. 20m Max
Insulation Resistance Apply 500V DC voltage between adjacent contacts and between contacts and enclosure for 1 minute. 100M Min
Withstand Voltage Apply 500V AC voltage between adjacent contacts and between contacts and enclosure for 1 minute. No breakdown and flashover
10. Environmental Characteristics
Heating Test Place in +1052 for 96H. Appearance: No damage. Contact Resistance: 30m Max
Cold Tolerance Test Place in -252 for 96H. Appearance: No damage. Contact Resistance: 30m Max
Moisture Resistance Test Place in 402, 90-96% RH for 96H. Appearance: No damage. Insulation Resistance: 50M MIN. Withstand Voltage: 200VAC/min
Temperature Cycle 5 cycles of -253 (30min), Room Temp (1H), +1053 (30min), Room Temp (1H). Appearance: No abnormalities. Contact Resistance: 30m Max
Salt Spray Test Continuous spray with 51% NaCl solution for 24H. Appearance: No damage or corrosion. Contact Resistance: 30m Max
Weldability Dip in 2355 tin solution for 2.50.5 seconds. Tin area above 95%
Soldering Resistance Reflow solder at 2605 for 51s or wave solder. Plastic parts: No obvious deformation, damage, or blistering. Electrical characteristics must meet specifications.
11. Mechanical Properties
PIN Fixing Force Apply force at 253mm/min until pin withdraws. Single PIN: 7N Min
Terminal Retention in Plastic Parts Pull terminal from socket at 253mm/min along wire direction. Single terminal: 5N Min
Mechanical Life Plug and unplug 50 times at 10 times/min without power. Contact Resistance: 30m Max
Insert Force/Draw Force Test at 205mm/minute. See table for PIN count specific values.

Insert/Draw Force Table:

PIN Insert (N) Pull Out (N) PIN Insert (N) Pull Out (N)
1 3.00 0.50 9 29.00 5.50
2 8.00 2.00 10 32.00 6.00
3 11.00 2.50 11 35.00 6.50
4 14.00 3.00 12 38.00 7.00
5 17.00 3.50 13 41.00 7.50
6 20.00 4.00 14 44.00 8.00
7 23.00 4.50 15 47.00 8.50
8 26.00 5.00 16 50.00 9.00
Message for quick reply
Related Products