HRS HK-A-PJ
Product Overview
This product is a high-performance component designed for reliable operation across a wide temperature range of -55 C to +125 C. It features a characteristic impedance of 50 and operates effectively from DC up to 40 GHz. The product is built for durability, withstanding 1000 mating cycles and meeting stringent requirements for contact resistance, insulation resistance, and mechanical stress. It is suitable for applications demanding high reliability, including potential use in automotive equipment.
Product Attributes
- Brand: HIROSE ELECTRIC CO., LTD.
- Part Number: HK-A-PJ
- Code Number: CL338-0097-0-00
- Drawing Number: ELC-374781-00-00
- Applicable Standard: IEC 60512 (Unless otherwise specified)
Technical Specifications
| SPECIFICATIONS | TEST METHOD | REQUIREMENTS | QT | AT |
|---|---|---|---|---|
| OPERATING AND STORAGE TEMPERATURE | ||||
| Operating temperature range | -55 C to +125 C (95 %RH Max.) | X | X | |
| Storage temperature range | -55 C to +125 C (95 %RH Max.) | X | X | |
| ELECTRICAL CHARACTERISTICS | ||||
| Contact resistance (100 mA Max. DC or 1000 Hz) | Center contact: 8 m Max. Outer contact: 4 m Max. | X | X | |
| Insulation resistance (500 V DC) | 1000 M Min. | X | X | |
| Withstanding voltage (500 V AC for 1 min.) | Current leakage: 2 mA Max. No flashover or breakdown. | X | X | |
| Voltage standing wave ratio (VSWR) | Frequency 0 to 18 GHz. | 1.1 Max. | X | X |
| Frequency 18 to 26.5 GHz. | 1.15 Max. | X | X | |
| Frequency 26.5 to 40 GHz. | 1.2 Max. | X | X | |
| Insertion loss | Frequency 0 to 40 GHz. | 0.03+0.03f dB Max. | X | X |
| MECHANICAL CHARACTERISTICS | ||||
| Contact insertion and extraction forces | 0.91 by steel gauge. | Insertion force: --- N Max. Extraction force: 0.5 to 4.9 N | - | - |
| Mechanical operation | 1000 times insertion and extractions. | 1) Contact resistance: Center contact 12 m Max., Outer contact 8 m Max. 2) No damage, crack and looseness of parts. | X | - |
| Vibration | Frequency 10 to 2000 Hz single amplitude 0.75 mm, 196 m/s at 10 cycles for 3 directions. | 1) No electrical discontinuity of 1 s. 2) No damage, crack and looseness of parts. | X | - |
| Shock | 1960 m/s at 3 times for 6 directions. pulse 6 ms | No damage, crack and looseness of parts. | X | - |
| Cable clamp strength (Against cable pull) | Using a pulling tester, pull the cable axially at a rate of mm/min. and record the strength at which the cable or connector breaks. | N Min. | - | - |
| ENVIRONMENTAL CHARACTERISTICS | ||||
| Damp heat (total 10 cycles. 240 h) | Exposed at -10 to +65 C, 90 to 98 % | 1) Insulation resistance: 100 M Min. (at high humidity) | X | - |
| 2) Insulation resistance: 1000 M Min. (at dry) | X | - | ||
| 3) No damage, crack and looseness of parts. | X | - | ||
| Rapid change of temperature | -65 +125 C Time 30 3 30 3 min. Under 5 cycles. | No damage, crack and looseness of parts. | X | - |
| Corrosion salt mist | Exposed in 5 % salt water spray for 48 h. | VSWR 1.1 Max. (Frequency 0 18 GHz.) 1.15 Max. (Frequency 1826.5 GHz.) 1.2 Max. (Frequency 26.540 GHz.) | X | - |