HRS DF11-8DP-2DSA(08)
Product Overview
This document outlines the specifications for HIROSE ELECTRIC CO., LTD. connectors, specifically the AWGH series and applicable DF11 series contacts. These products are designed for high-reliability applications, particularly within the automotive industry. Key features include specified operating and storage temperature and humidity ranges, voltage and current ratings, and detailed electrical, mechanical, and environmental characteristics.
| Specification | Value | Test Method / Requirements |
|---|---|---|
| Operating Temperature Range | -40C TO +85C (NOTE 1) | |
| Storage Temperature Range | -10C TO +60C (NOTE 2) | |
| Operating Humidity Range | 40% TO 80% (NOTE 3) | |
| Storage Humidity Range | 40% TO 70% (NOTE 2) | |
| Voltage Rating | 30V AC | |
| Current Rating (AWGH22-2A) | 2A | |
| Current Rating (AWGH24-28) | 1A | |
| Current Rating (AWGH#30) | 0.5A | |
| Contact Resistance | 30m MAX. (at 100mA DC or 1000 Hz) | VISUALLY AND BY MEASURING INSTRUMENT. CONFIRMED VISUALLY. |
| Insulation Resistance | 1000M MIN. (at 500V DC) | |
| Voltage Proof | 650V AC for 1 min. | NO FLASHOVER OR BREAKDOWN. |
| Mechanical Durability | 30 times insertions and extractions | @ CONTACT RESISTANCE: 30m MAX. @ NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Vibration Resistance | 10 to 55 Hz, single amplitude 0.75 mm, at 2h, for 3 directions | @ NO ELECTRICAL DISCONTINUITY OF 1s. @ NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Shock Resistance | 490 m/s duration of pulse 11 ms at 3 times for 3 directions | @(D NO ELECTRICAL DISCONTINUITY OF 1s. @ NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Damp Heat (Steady State) | 40 2C, 90 to 95 %, 96 h | @ INSULATION RESISTANCE: 1000M MIN. @ CONTACT RESISTANCE: 30m MAX. @ NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Rapid Change of Temperature | -55 to +85C (30 min max. per change) under 5 cycles | @ CONTACT RESISTANCE: 30m MAX. @ INSULATION RESISTANCE: 500M MIN. @ NO DAMAGE, CRACK OR LOOSENESS OF PARTS. |
| Resistance to Automatic Soldering (Flow) | Solder Temperature: 260C for 10 sec. | NO STRENGTH ON CONTACT. NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. |
| Resistance to Manual Soldering | Soldering Iron Temperature: 300C, Soldering Time: 2 sec. | NO STRENGTH ON CONTACT. NO DEFORMATION OF CASE OF EXCESSIVE LOOSENESS OF THE TERMINALS. |
| Solderability | Solder Temperature: 230C for 3 sec. | SOLDER SHALL COVER A MINIMUM OF 95 % OF THE SURFACE BEING IMMERSED. |
| Note | Description |
|---|---|
| NOTE 1 | INCLUDING THE TEMPERATURE RISE BY CURRENT |
| NOTE 2 | APPLY TO THE CONDITION OF LONG TERM STORAGE FOR UNUSED PRODUCTS BEFORE MOUNTED ON PCB. AFTER MOUNTED ON PCB, OPERATION TEMPERATURE AND HUMIDITY RANGE IS APPLIED FOR INTERIM STORAGE DURING TRANSPORTATION. |
| NOTE 3 | NON-CONDENSING. |