HRS DF52-5S-0.8H(21)
DF52 Series Connectors
The DF52 Series offers 0.8mm pitch, compact, and robust wire-to-board connectors designed for various applications.
Brand
HIROSE ELECTRIC CO., LTD.
Product Line
DF52 Series
Pitch
0.8mm
Type
Compact and Robust Wire-to-Board Connectors
| No. of Contacts | Current Rating (AWG) | Voltage Rating (AC/DC) | Operating Temperature Range | Operating Humidity Range | Storage Temperature Range | Storage Humidity Range | Insulation Resistance | Withstanding Voltage | Contact Resistance | Vibration Resistance | Shock Resistance | Moisture Resistance | Temperature Cycle | Mating Durability | Solder Heat Resistance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2, 3-5, 6-10, 12 or more | 32 AWG: 1.5A/1.0A/0.8A/0.8A 30 AWG: 2.0A/1.5A/1.2A/1.0A 28 AWG: 2.5A/2.0A/1.5A/1.2A | 100V | -40 to 85C (Note 1) | 20 to 80 % (Note 2) | -10 to 60C (Note 3) | 40 to 70% (Note 3) | 100M min. (at 100V DC) | 300V AC for 1 minute (No flashover) | 10m max. (at 20V DC, 1mA) | No discontinuity for >1s (10-55Hz, 0.75mm amplitude) | No discontinuity for >1s (490 m/s, 11ms) | Contact Resistance: 20M max., Insulation Resistance: 100M min. (402C, 90-95% humidity, 96 hours) | Contact Resistance: 20M max., Insulation Resistance: 100M min. (5 cycles: -55C to 85C) | Contact Resistance: 20M max. (20 cycles) | Reflow/Manual soldering (350C 10C for 3 sec) |
| Product | Insulator Material | Insulator Color | Insulator Certification | Contact Material | Contact Finish |
|---|---|---|---|---|---|
| Receptacle | Polyamide | Black | UL94V-0 | Copper alloy | Tin plating |
| Crimping Plug Insulator | Polyamide | Black | UL94V-0 | - | - |
| Crimp Contact | - | - | - | Copper alloy | Tin plating |
| Tool Type | Part No. | HRS No. | Applicable Contact | Remarks |
|---|---|---|---|---|
| APPLICATOR | AP105-DF52-2832P | 901-4636-7 | DF52-2832PCF | Manufactured by Japan Automatic Machine Co.,Ltd. |
| Press body | CM-105C | 901-0001-0 | - | - |
| Pull-out tool | DF-C-PO(B) | 550-0179-2 | DF52-2832PCF | - |
Product Number Structure
Plug connector: DF52-%P-08C
Receptacle: DF52-%S-08H
Crimp contact: DF52-2832PCF
Key: % = Number of contacts (2, 3, 4, 5, 6, 8, 10, 12, 14, 15, 16, 17, 20), S = Receptacle, P = Crimping plug, H = SMT Right Angle Type, C = Crimping plug, 2832 = Applicable wire size (28 to 32 AWG), PCF = Plug crimp contact, reel.
Precautions
- Recommended Temperature Profile for lead-free soldering: Peak 250C max., Heating area 220C min. for < 60 sec, Preheating area 150-180C for 90-120 sec, Max 2 times.
- Recommended manual soldering: 350C 10C for 3 sec.
- Recommended screen thickness: 0.1mm, aperture opening ratio: 100%.
- Warpage of the Board: Max 0.02mm at the center of connector.
- Cleaning Conditions: IPA cleaning allowed. Other cleaning agents require contact.
- Mating operation of the connector when not mounted on the board may cause damage.
- Do not apply flux during hand soldering.
- Housing color may have slight variations.
- Refer to "DF52 mating and unmating Procedure Document (ETAD-H0788)" for handling.
- Refer to "Harness procedure manual (ETAD-H0791)" for harness operations.