HRS DF11-8DS-2DSA(05)
Product Overview
The DF11 Series offers a 2.0mm pitch, double-row connector compliant with UL/CSA safety standards. These connectors are designed for reliable wire-to-board and crimp applications.
Brand
Brand
Certifications
Certifications
| Item | Wire Size | Rated Current (Note 1) | Rated Voltage | Operating Temperature Range | Operating Humidity Range | Storage Temperature Range | Storage Humidity Range |
|---|---|---|---|---|---|---|---|
| General | 22 to 26 AWG (Crimping) | 2A | 250V AC | -30 to +85C (Note 2) | 40 to 80% (Note 3) | -10 to +60C (Note 4) | 40 to 70% (Note 4) |
| Insulation Displacement | 28 AWG | 1A | 100V AC | ||||
| Insulation Displacement | 30 AWG | 0.5A | |||||
| Insulation Displacement | 26 AWG | 1A |
| Item | Condition | Specification | Value |
|---|---|---|---|
| Insulation Resistance | 500V DC | 1000M Min. | |
| Withstanding Voltage | 650V AC for 1 min. | No flashover or insulation breakdown. | |
| Contact Resistance | 100mA | 30m Max. | |
| Single Insertion/Extraction Force | 0.3N (30gf) Min. to 4.4N (450gf) Max. | Measured by the square steel pin at 0.5+ 0.002mm | |
| Vibration | No electrical discontinuity of 1 s or more | Frequency: 10 to 55Hz, single amplitude of 0.75mm, 2 hours in each of the 3 directions. | |
| Humidity (Steady State) | 402C, 90 to 95% RH, 96 hours | Contact Resistance: 30m Max., Insulation Resistance: 500M Min. | |
| Temperature Cycle | 5 cycles (-55C: 30 min -> 5 to 35C: 10 min -> 85C: 30 min -> 5 to 35C: 10 min) | Contact Resistance: 30m Max., Insulation Resistance: 1000M Min. | |
| Mating Durability | Contact Resistance: 30m Max. | Tin Plated: 30 cycles, Gold Plated: 50 cycles | |
| Resistance to Soldering Heat | Flow | 260C for 10 seconds | |
| Resistance to Soldering Heat | Manual soldering (Through Hole) | 300C for 2 seconds | |
| Resistance to Soldering Heat | Manual soldering (SMT) | 300C for 3 seconds | |
| Resistance to Soldering Heat | Reflow (SMT) | At the SMT recommended temperature profile |
| Soldering Condition (SMT) | Recommended Temperature | Recommended Time |
|---|---|---|
| Soldering iron | 290 10C | Within 2 seconds |
| Item | Specification |
|---|---|
| Screen Thickness (SMT) | 0.15 to 0.2mm |
| Board Warpage (SMT) | Max. 0.03mm in the connector center area (based on both connector edges) |
| Recommended Flow Soldering (Through-hole) | 250C for 10 seconds |
| Manual Soldering (Through-hole) | Soldering iron temperature 290 10C for 2 seconds |
| Cleaning Condition | Refer to the "Wire-to-Board Connector Use Handbook". |
| Connection Condition | Refer to the "Wire-to-Board Connector Use Handbook". |
Precautions
- When inserting the crimp terminal into the IDC socket, do not insert diagonally to maintain performance reliability.
- Refer to DF11 Series Cable Assembly Procedure (ETAD-H0965-00), DF11#-##SC##(##) Crimp Quality Standard (ETAD-HO773-00), DF11#-EP####PC##(##) (ETAD-H0935-00) and Crimp Condition for cable assembly procedures.
- Refrain from insertion and removal when not mounted to the board as it may result in damage or deformation of the contacts.
- Do not remove the product by holding the cable as it may result in damage.
- When soldering by hand, do not apply flux that may result in flux rising.
- There may be slight variation in mold coloration based on production lot, but this does not affect product performance.
Handling Instructions
- Refer to the following documents when handling this product: Crimp Quality Standard (ETAD-H0773-00, ETAD-H0835-00), Cable Assembly Procedure (ETAD-H0965-00), Wire-to-Board Connector Use Handbook.
General Notes
- Specifications mentioned in this catalog are reference values. When considering to order or use this product, please confirm the "Drawing" and "Product Specifications" sheets.
- Use an appropriate cable when using the connector in combination with cables. If considering usage of a non-specified cable, please contact your sales representative.
- If assembly process is done by jigs & tools which are not identified by Hirose, assurance will not be given.
- Please consult with your Hirose sales representative if you are planning to use the product for any of the following applications: Automotive, medical, public infrastructure, aerospace/defense, etc.
- Hirose will consider the validity of the warranty depending on the conditions.
- The contents of this catalog are current as of date of 3/2021. Contents are subject to change without notice for the purpose of improvements.
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
