HRS DF51K-6DP-2DSA(800)
DF51K Series
2mm Pitch, Positive lock, Wire-to-Board Connector (UL, C-UL Listed)
| Item | Specifications | Conditions |
|---|---|---|
| Insulation Resistance | No less than 1,000M | Measured at 500V DC |
| Withstanding Voltage | No flashover or breakdown | 650V AC is applied for 1 minute |
| Contact Resistance | No more than 30m | Measured at 1mA and no higher than 20mV |
| Vibration Resistance | No electrical discontinuity of 1s or greater | Frequency: 10 to 55Hz, half amplitude 0.75mm, 10 times in each of the 3 directions |
| Shock Resistance | No electrical discontinuity of 1s or greater | Acceleration velocity: 490m/s for 11ms, half-sine wave in 3 directions, 3 times for each direction |
| Moisture Resistance | Contact resistance: no more than 30m Insulation resistance: no less than 500M | Temperature: 402C, humidity: 90 to 95%, left as it is for 96 hours |
| Temperature Cycles | Contact resistance: no more than 30m Insulation resistance: no less than 1,000M | -55C: 30 minutes 105C: 30 minutes, 5 cycles |
| Mating Durability | Contact resistance: no more than 30m | Tin plated: 30 mating cycles, Gold plated: 50 mating cycles |
| Soldering Heat Resistance | The resin parts should withstand the temperature and resist melting. | Flow: 260C, 5 sec. Hand soldering: temperature of soldering iron at 270C for 3 seconds |
| Number of Contacts | Rated Single Current (Note 1) | Rated Voltage | Operating Temperature | Operating Humidity Range (Note 3) | Storage Temperature (Note 4) | Storage Humidity Range (Note 4) |
|---|---|---|---|---|---|---|
| 22 AWG | 3A | 250V AC/DC | -55 to +105C (Note 2) | 20 to 80% (Note 3) | -10 to +60C (Note 4) | 40 to 70% (Note 4) |
| 24 AWG | 2.5A | |||||
| 26 AWG | 2A | |||||
| 28 AWG | 2A | |||||
| 30 AWG | 1A | |||||
| Double Row (6-30 contacts) | 1.5A | 30V AC/DC | -55 to +105C (Note 2) | 20 to 80% (Note 3) | -10 to +60C (Note 4) | 40 to 70% (Note 4) |
| Part No. | HRS No. | Packaging | Finish |
|---|---|---|---|
| DF51K-22SCF(800) | 480-0581-000 | 10,000/reel | Tin plated |
| DF51K-22S5C(800) | 480-0582-000 | 100/pack | |
| DF51K-2428SCF(800) | 480-0583-000 | 10,000/reel | |
| DF51K-2428SC(800) | 480-0584-000 | 100/pack | |
| DF51K-30SCF(800) | 480-0585-000 | 10,000/reel | |
| DF51K-30SC(800) | 480-0586-000 | 100/pack | |
| DF51K-22SCFA(800) | 480-0612-000 | 10,000/reel | Gold plated |
| DF51K-22SCA(800) | 480-0613-000 | 100/pack | |
| DF51K-2428SCFA(800) | 480-0614-000 | 10,000/reel | |
| DF51K-2428SCA(800) | 480-0615-000 | 100/pack | |
| DF51K-30SCFA(800) | 480-0616-000 | 10,000/reel | |
| DF51K-30SCA(800) | 480-0617-000 | 100/pack |
| UL Wire Size | Jacket Diameter | Applicable Crimping Tool Type | Part No. | HRS No. | Wire Type | Applicable Contacts |
|---|---|---|---|---|---|---|
| 1061 22 AWG (17 pieces / 0.16mm) | 1.2 to 1.45mm | Applicator | AP105-DF11-22S | 901-4529-700 | UL1061 (22 AWG) | DF51K-22SCF/SCFA |
| 1007 24 AWG (11 pieces / 0.16mm) | 0.9 to 1.45mm | |||||
| 1007 26 AWG (7 pieces / 0.16mm) | 0.9 to 1.45mm | |||||
| 28 AWG (7 pieces /0.127Tmm) | 0.9 to 1.45mm | |||||
| 1061 30 AWG (7 pieces / 0.1mm) | 0.8mm | |||||
| Press Unit | CM-105C | 901-0001-000 | ||||
| UL1061 (22 AWG) | Hand Tool | HT801/DF11-22S(A) | 550-0407-500 | UL1061 (22 AWG) | DF51K-22SC/SCA | |
| UL1007 (24 to 28 AWG) | ||||||
| UL1061 (30 AWG) | ||||||
| Contact Extraction Tool | DF-C-PO(B) | 550-0179-200 | DF51K-*****SCF/SCFA |
| Material | Finish | UL Regulation |
|---|---|---|
| Straight: PA66 Right Angle: PBT (glass-reinforced) | Black | UL34V-0 |
| Brass | Tin Plated or Gold Plated | |
| PBT (glass-reinforced) | Black | UL94V-0 |
| Phosphor bronze | Tin Plated or Gold Plated |
HRS DF56C-26S-0.3V(51)
Product InformationThis document appears to be a label or part of a manual for a product. The text is largely unreadable due to image quality or formatting. No specific product overview, advantages, or application scenarios can be extracted.Part NumberModelDateSIU3PUOCSIL0IMOPUIM SI(BS N0 121032023...
HRS DF36A-25S-0.4V(51)
Product OverviewThe DF36 Series is a 0.4mm pitch, vertical mating, micro-coaxial cable connector designed for high-density applications. It offers a reliable connection solution for micro-coaxial cables, featuring space-saving configurations suitable for modern electronic devices.Brand: Hirose ...
HRS DF56C-30S-0.3V(51)
Product OverviewThe provided text appears to be a scanned document with OCR errors and does not contain clear product information such as function, usage, advantages, or application scenarios. Therefore, this section cannot be populated.AttributeValueProduct NameSIU3PUOCSIL0I MOPUIM SIS N0 ...
HRS DF56-50S-0.3V(51)
Product OverviewThe provided text does not contain clear information about product overview, function, usage, advantages, or application scenarios. It appears to be garbled or incomplete technical data.Part NumberDescriptionUnit PriceSJU3PUOCSIL0IMOPUIM SI(BS N0 12103 Ajpuny AUpigena) YSIy PUBLIP ...
