<
>
HCTL HC-HY-PT-05
HCTL HC-HY-PT-05
Manufacturer:HCTL
Model Number:HC-HY-PT-05
Minimum Order Quantity:50
Standard Packaging:-
Delivery Time:1 working day
Product Details
Rated Voltage (Max):
250V
Contact Plating:
Tin
Contact Material:
Phosphor Bronze
Reference Series:
HY
Product Description
Detailed Specifications & Features
Product Overview
This specification covers the 2.00 series connector strip, detailing its performance, test methods, and inspection requirements. It is designed for various applications requiring reliable electrical connections.
Product Attributes
- Brand: HCT ()
- Origin: Shenzhen, China
- Certifications: UL94V-O
Technical Specifications
| Item | Requirement | Test Mode |
|---|---|---|
| 3. Use Condition | ||
| Ambient temperature Range | -25 +85 | |
| Applicable Wire Sizes | AWG #2228 | |
| Applicable PC board thickness | 0.8l.6mm | |
| 4. Appearance and Dimension | ||
| Appearance | Product surface without defect, dirt, crack, and mechanical damage; Contact without rust plating not oxides and not peeled. | |
| Dimension | According to drawings | |
| Exchangeable | Exchangeable with same specification products. | |
| 5. Material | ||
| Terminal Contact | Brass, Thickness 0.50mm, Tin plating: 2.55 m | |
| Housing Plastic | Nylon66 UL94V-O, Color: White | |
| Plastic Wafer (Straight Pin) | LCP UL94V-O, Color: Nature | |
| Plastic Wafer (Right Angle Pin) | Nylon66 UL94V-O, Color: White | |
| Plastic Wafer (Vertical Mount) | LCP UL94V-O, Color: Nature | |
| Plastic Wafer (Horizontal Mount) | Nylon66 UL94V-O, Color: White | |
| 6. Electrical Performance | ||
| Rated Voltage | 250V AC DC | |
| Rated Current | 3A AC DC | |
| Withstand voltage | Apply 1000V AC(rms)for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors. No breakdown or flashover. | |
| Contact Resistance | Initial value 20m. Does not include wire resistance. | A maximum voltage of 20mV and maximum current of 100mA are applied to the Mate connector. |
| Insulation Resistance | More than 1000 M | Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance. |
| 7. Mechanical Performance | ||
| Single contact insertion force | Less than 5N | The housing together with the terminal ends with wafer matched at a rate per minute to 253mm inserting force test. |
| Single contact Withdrawal force | 15N | The terminal and the hole seat at a react per minute to 253mm along the write direction are pulled out from the hole in the seat capacity. |
| Pin Retention Force | 13N (AWG#28) to 50N (AWG#22) | Exerts a force on the pin end at a rate per minute 253mm until the needle exit Seat pull-out force. |
| Terminal crimping Wire strength | 15N (AWG#28) to 50N (AWG#22) | Terminal crimping wire Axial per minute to 25 3mm rate of the pullout force. |
| Durability | Contact Resistance 40m. Appearance: No damage. | Mate connectors up 30 cycles at a Maximum rate of 10 cycles per minute prior to environmental test. |
| Vibration | Current Discontinuity: 1 sec Max. Contact Resistance 40m. Appearance: No damage. | Amplitude: 1.5mm p-p. Frequency: 10-55-10 Hz/minute. Period: 2 hours for each direction (X, Y, Z axes). |
| 8. Environmental Performance | ||
| Thermal Aging | Contact Resistance 40m. Appearance: No damage. | Temperature: 852. Period: 96 hours continuously. |
| Temperature Rise | Mate connector measure the temperature rise of contact when the maximum rated current is passed. | |
| Constant Humidity | Contact Resistance 40m. Insulation Resistance 1000m. Appearance: No damage. | Temperature: 402 C. Relative humidity: 90-95% (RH). Period: 96 hours continuously. |
| Temperature Cycling | No breakdown or flashover. | One cycle: -553C for 30min, room temp for 10-15min; 853C for 30min, room temp for 10-15min. Total cycle: 5 cycles. |
| Salt Spray | Contact Resistance 40m. Appearance: No damage. | Concentration: 51%. Temperature: 353 C. Period: 8 hours after plating, 48 hours before plating. |
| Solder Ability | Area of soldering: 90 %. | Solder temperature: 2455C. Immersion period: 3 0.5S. |
| Resistance to Soldering Heat | Appearance: No damage. | Soldering time: 30.5S. Soldering pot: 3505. |
Message for quick reply
Related Products
TE Connectivity 2-330495-1
TE Connectivity 2383445-2
Amphenol SLPIPB50BSB0EH
Product Overview The Amphenol SURLOK PLUS WITH EMI, INLINE PLUG SIZE C is a high-performance connector designed for robust industrial applications. It offers a reliable solution for power connections, featuring EMI shielding and a robust design suitable for demanding environments. This connector is ...
