Harwin M80-5001442
Product Overview
A range of 2mm pitch male and female rectangular, fully shrouded unsealed connectors with replaceable contacts for interconnecting board to board, cable to board, and cable to cable. The range covers 2 to 96 ways, in various application methods. Female connectors are available for crimp, vertical through-board, and surface mount termination. Male connectors are available for crimp, vertical or horizontal (90) through-board and surface-mount termination. Pre-cabled contacts and cable assemblies are also available in various options.
The connectors are provided with a range of contact terminations that are gold or tin plated. The contact zone of a gold-plated contact is hard acid gold of 98% purity.
The connector is intended for use as a low voltage connector in high packing density electronic equipment. The connector is polarized to prevent mis-matching and can be produced with a latching feature (L-Tek) or in a jackscrew (J-Tek) format, with or without board mounting.
L-Tek and J-Tek connectors are available with low-frequency (LF) contacts, while mixed technology (Mix-Tek) connectors are also available with jackscrews, with a choice of power or coax contacts.
Note: Some connector styles are available manufactured and tested to BS9525 FO0O33. All other connectors in the range are designed to the same specification. For cable assembly specifications see Component Specification CO49XX (where XX is the latest issue).
Product Series
Contact Pitch
Contact Types
Termination Options
Polarization
Mounting Options
Special Features
Contact Plating
Contact Purity (Gold)
Environmental Classification
| Specification | Standard Signal Contact | T-Contact | Flex Circuit Assembly |
|---|---|---|---|
| Current Rating (1 contact loaded, 25C ambient) | - | 8.5A max | - |
| Current Rating (1 contact loaded, 85C ambient) | - | 6.5A max | - |
| Current Rating (all contacts, 25C ambient) | - | 3.5A max | 1.0A max (per individual track) |
| Current Rating (all contacts, 85C ambient) | - | 2.6A max | - |
| Working Voltage (sea level) | 800V DC or AC peak | - | 300V DC or AC peak |
| Voltage Proof (sea level) | 1,200V DC or AC peak | - | - |
| Contact Resistance | 20m max | - | - |
| Contact Resistance (After Conditioning) | 25m max | - | - |
| Insulation Resistance | 1,000M min | - | - |
| Insulation Resistance (After Conditioning) | 100M min | - | - |
| Creepage Path (contact-to-contact) | 0.35mm min | - | - |
| Air Gap (contact-to-contact) | 0.35mm min | - | - |
| Operating Temperature Range | -55C to +125C | ||
| Low Air Pressure Severity (1 contact loaded) | 300 mbar (9,144m/30,000ft) up to 360V DC | ||
| Salt Spray (SRS BS2011 Part 2.1Kb Severity 2) | 66 hours | - | - |
| Salt Spray (EIA364 Test Procedure 26 condition A) | - | 96 hours | - |
| Vibration Severity (10G test) | 10Hz to 2,000Hz, 0.75mm, 98m/s (10G), 6 hours | - | - |
| Vibration Severity (20G test) | 10Hz to 81.73Hz (1.5mm pp), 57.55Hz to 2,000Hz (196.2m/s), 2 hours | - | - |
| Vibration Severity (T-Contact) | - | 10Hz to 13.6Hz (35mm pp), 13.6Hz to 41.6Hz (1.5mm pp), 41.6Hz to 2,000Hz (392.4m/s), 6 hours | - |
| Shock Severity | 981m/s (100G), 18 shocks | 981m/s (100G) | - |
| Bump Severity | 390m/s (40G), 4,000+10 bumps | - | - |
| Clip Retention in Body | 18N min (avg 22N from 10 sockets) | - | - |
| Contact Retention in Housing | 10N min | - | - |
| Contact Replacement in Housing (Male Crimp Jackscrew) | 2 operations at 10N | - | - |
| Durability (Standard Signal Contact) | 500 operations | - | - |
| Durability (T-Contact) | - | 1,000 operations | - |
| Contact Holding Force (Standard Signal Contact) | 0.2N min | - | - |
| Insertion Force (per contact, mated to pin, no fixings) | 2.0N max (M80) / 1.0N max (M83) | 4.0N max | - |
| Withdrawal Force (per contact, mated to pin, no fixings) | 0.2N min (M80) / 0.2N min (M83) | 0.5N min | - |
| Cable Contact Replacement in Housing | up to 2 times max | - | - |
| Contact Wipe (T-Contact) | - | 2.00mm min | - |
| Test | Condition |
|---|---|
| Latch Integrity on L-Tek | 20N force applied for 10 seconds (no failure of latch mechanism) |
| Board Mount Jackscrew Fixings Torque | 21 2 cmN |
| Jackscrew Engagement Torque | Max 23 cmN |
HRS DF56C-26S-0.3V(51)
Product InformationThis document appears to be a label or part of a manual for a product. The text is largely unreadable due to image quality or formatting. No specific product overview, advantages, or application scenarios can be extracted.Part NumberModelDateSIU3PUOCSIL0IMOPUIM SI(BS N0 121032023...
HRS DF36A-25S-0.4V(51)
Product OverviewThe DF36 Series is a 0.4mm pitch, vertical mating, micro-coaxial cable connector designed for high-density applications. It offers a reliable connection solution for micro-coaxial cables, featuring space-saving configurations suitable for modern electronic devices.Brand: Hirose ...
HRS DF56C-30S-0.3V(51)
Product OverviewThe provided text appears to be a scanned document with OCR errors and does not contain clear product information such as function, usage, advantages, or application scenarios. Therefore, this section cannot be populated.AttributeValueProduct NameSIU3PUOCSIL0I MOPUIM SIS N0 ...
HRS DF56-50S-0.3V(51)
Product OverviewThe provided text does not contain clear information about product overview, function, usage, advantages, or application scenarios. It appears to be garbled or incomplete technical data.Part NumberDescriptionUnit PriceSJU3PUOCSIL0IMOPUIM SI(BS N0 12103 Ajpuny AUpigena) YSIy PUBLIP ...
