Harwin M80-5001042
Product Overview
A range of 2mm pitch male and female rectangular, fully shrouded unsealed connectors with replaceable contacts for interconnecting board to board, cable to board and cable to cable. The range covers 2 to 96 ways, in various application methods. Female connectors are available for crimp, vertical through-board and surface mount termination. Male connectors are available for crimp, vertical or horizontal (90) through-board and surface-mount termination. Pre-cabled contacts and cable assemblies are also available in various options.
The connectors are provided with a range of contact terminations that are gold or tin plated. The contact zone of a gold plated contact is hard acid gold of 98% purity.
The connector is intended for use as a low voltage connector in high packing density electronic equipment. The connector is polarised to prevent mis-matching and can be produced with a latching feature (L-Tek) or in a jackscrew (J-Tek) format, with or without board mounting.
L-Tek and J-Tek connectors are available with low-frequency (LF) contacts, while mixed technology (Mix-Tek) connectors are also available with jackscrews, with a choice of power or coax contacts.
Some connector styles are available manufactured and tested to BS9525 FO0O33. All other connectors in the range are designed to the same specification.
Product Attributes
Brand
M80 & M83 SeriesConnector Type
Rectangular, Fully Shrouded, UnsealedPitch
2mmContact Plating
Gold or TinContact Purity (Gold)
98% Acid GoldPolarization
YesMounting Options
Board to Board, Cable to Board, Cable to CableTermination Options (Female)
Crimp, Vertical Through-board, Surface MountTermination Options (Male)
Crimp, Vertical Through-board, Horizontal (90) Through-board, Surface MountOptional Features
Latching (L-Tek), Jackscrew (J-Tek), Mixed Technology (Mix-Tek)Available Contacts
Low-Frequency Signal, Power, Coax| Specification | Value | Condition |
|---|---|---|
| Environmental Classification | 55/125/56 | Days at 95% RH |
| Operating Temperature Range | -55C to +125C | |
| Low Air Pressure Severity | 300 mbar (9,144m/30,000ft) | One contact electrically loaded |
| Voltage Proof | 1,200V DC or AC peak | 1,013mbar, Sea Level |
| Insulation Resistance | 1,000 M min | |
| Insulation Resistance (After Conditioning) | 100 M min | |
| Creepage Path (contact-to-contact) | 0.35mm min | |
| Air Gap (contact-to-contact) | 0.35mm min | |
| Clip Retention in Body | 18N min | |
| Contact Retention in Housing | 10N min | |
| Durability (Standard Signal Contact) | 500 operations | |
| Durability (T-Contact) | 1,000 operations | |
| Insertion Force (M80 Standard Signal) | 2.0N max | Per contact, mated to standard mating pin, no fixings |
| Insertion Force (M83 Signal) | 1.0N max | Per contact, mated to standard mating pin, no fixings |
| Insertion Force (T-Contact) | 4.0N max | Per contact, mated to standard mating pin, no fixings |
| Withdrawal Force (M80 Standard Signal) | 0.2N min | Per contact, mated to standard mating pin, no fixings |
| Withdrawal Force (M83 Signal) | 0.2N min | Per contact, mated to standard mating pin, no fixings |
| Withdrawal Force (T-Contact) | 0.5N min | Per contact, mated to standard mating pin, no fixings |
| Contact Wipe (T-Contact) | 2.00mm min |
| Contact Type | Current Rating | Condition |
|---|---|---|
| Standard Signal Contact | 8.5A max | One contact loaded, 25C ambient |
| Standard Signal Contact | 6.5A max | One contact loaded, 85C ambient |
| Standard Signal Contact | 3.5A max | All contacts loaded, 25C ambient |
| Standard Signal Contact | 2.6A max | All contacts loaded, 85C ambient |
| T-Contact | 8.5A max | One contact loaded, 25C ambient |
| T-Contact | 6.5A max | One contact loaded, 85C ambient |
| T-Contact | 3.5A max | All contacts loaded, 25C ambient |
| T-Contact | 2.6A max | All contacts loaded, 85C ambient |
| Flex Circuit Assembly | 1.0A max | Per individual track, 25C ambient |
| Specification | Value | Condition |
|---|---|---|
| Working Voltage | 300V DC or AC peak | Pre-Cabled Contacts & Cable Assemblies |
| Working Voltage | 800V DC or AC peak | Other Connectors |
| Contact Resistance | 20m max | |
| Contact Resistance | 25m max | After Conditioning |
| Vibration Severity (Standard Signal) | 10Hz to 2,000Hz, 0.75mm, 98m/s (10G) | 6 hours duration |
| Vibration Severity (Standard Signal) | 10Hz to 81.73Hz, 1.5mm peak-to-peak; 57.55Hz to 2,000Hz, 196.2m/s (20G) | 2 hours duration |
| Shock Severity (Standard Signal) | 981m/s (100G) | 18 shocks total |
| Bump Severity (Standard Signal) | 390m/s (40G) | 4,000+10 bumps |
| Vibration Severity (T-Contact) | 10Hz to 13.6Hz, 35mm peak-to-peak, 13.6Hz to 41.6Hz, 1.5mm peak-to-peak, 41.6Hz to 2,000Hz, 392.4m/s (40G) | 6 hours duration |
| Shock Severity (T-Contact) | 981m/s (100G) | |
| Salt Spray (SRS) | Severity 2 | 5% Solution, 6.5/7.2pH @ 40C, 93% Humidity for 66 hours |
| Salt Spray (J-Tek & Mix-Tek) | EIA364 Test Procedure 26 condition A | 5% Solution, 6.5/7.2pH @ 35C, 95% Humidity for 96 hours |
| Jackscrew Torque (Board Mount) | 212cmN | Tightening to PCB |
| Jackscrew Torque (Engagement) | 23cmN max | Per screw |
| Latch Integrity Test | No failure of latch mechanism | 20N force applied for 10 seconds |
Megastar ZX-PHB2.0-2-DZ
Product Overview Product Name: PHB2.0 (PHB2.0 Male Terminal) Model: ZX-PHB2.0-2-DZ Description: This is a PHB2.0 male terminal, designed for specific applications requiring reliable electrical connections. Certifications: RoHS compliant. Brand ZX Part Number ZX-PHB2.0-2-DZ Revision 0 Date 2020/12/02 ...
TE Connectivity 350792-1
TE Connectivity 828920-1
Product OverviewFunction/Usage: Single wire seal for 7.5mm (TC. System).Notes: Details of execution are left to the manufacturer. Suitable for wire size range 0.02-1.0mm. Suitable for insulation diameter 1.92-2.11mm. Insertion aid for single wire sealing: see document 3 1579007 2. Air bubbles are ...
TE Connectivity 929975-1
Product InformationThis document outlines specifications and guidelines related to electroplating processes, focusing on transition areas, overlapping layers, and surface requirements. It details acceptable plating thicknesses and conditions to ensure product integrity and performance.BrandRIVARKSOr...
