Harwin M80-5000642
Product Overview
A range of 2mm pitch male and female rectangular, fully shrouded unsealed connectors with replaceable contacts for interconnecting board to board, cable to board, and cable to cable. The range covers 2 to 96 ways, in various application methods. Female connectors are available for crimp, vertical through-board, and surface mount termination. Male connectors are available for crimp, vertical or horizontal (90) through-board, and surface-mount termination. Pre-cabled contacts and cable assemblies are also available in various options.
The connectors are provided with a range of contact terminations that are gold or tin plated. The contact zone of a gold-plated contact is hard acid gold of 98% purity.
The connector is intended for use as a low voltage connector in high packing density electronic equipment. The connector is polarised to prevent mis-matching and can be produced with a latching feature (L-Tek) or in a jackscrew (J-Tek) format, with or without board mounting.
L-Tek and J-Tek connectors are available with low-frequency (LF) contacts, while mixed technology (Mix-Tek) connectors are also available with jackscrews, with a choice of power or coax contacts.
Note: Some connector styles are available manufactured and tested to BS9525 FO0O33. All other connectors in the range are designed to the same specification.
Connector Type
Rectangular, Fully Shrouded, Unsealed
Contact Pitch
2mm
Contact Options
Replaceable contacts (gold or tin plated)
Polarization
Yes
Mounting Options
Board to board, Cable to board, Cable to cable
Termination Options (Female)
Crimp, Vertical through-board, Surface mount
Termination Options (Male)
Crimp, Vertical through-board, Horizontal (90) through-board, Surface mount
Special Features
L-Tek (Latching), J-Tek (Jackscrew)
Mixed Technology Options
Mix-Tek with jackscrews (power or coax contacts)
| Specification | Standard Signal Contact | T-Contact | Flex Circuit Assembly |
|---|---|---|---|
| Current Rating (25C ambient, 1 contact loaded) | - | 8.5A max | - |
| Current Rating (85C ambient, 1 contact loaded) | - | 6.5A max | - |
| Current Rating (25C ambient, all contacts) | - | 3.5A max | - |
| Current Rating (85C ambient, all contacts) | - | 2.6A max | - |
| Current Rating (25C ambient, individual track) | - | - | 1.0A max |
| Working Voltage (DC or AC peak) | 800V | - | 300V |
| Voltage Proof (DC or AC peak) | 1,200V | - | - |
| Contact Resistance | 20m max | - | - |
| Contact Resistance (After Conditioning) | 25m max | - | - |
| Insulation Resistance | 1,000M min | - | - |
| Insulation Resistance (After Conditioning) | 100M min | - | - |
| Creepage Path (contact-to-contact) | 0.35mm min | - | - |
| Air Gap (contact-to-contact) | 0.35mm min | - | - |
| Environmental Classification | 55/125/56 (95% RH) | - | - |
| Operating Temperature Range | -55C to +125C | - | - |
| Low Air Pressure Severity | 300 mbar (9,144m/30,000ft) | - | - |
| Salt Spray (SRS BS2011 Part 2.1Kb) | Severity 2 (66 hours) | - | - |
| Salt Spray (EIA364 Test Procedure 26) | - | Condition A (96 hours) | - |
| Vibration Severity (10G test) | 10Hz to 2,000Hz, 0.75mm, 98m/s (10G), 6 hours | - | - |
| Vibration Severity (20G test) | 10Hz to 81.73Hz (1.5mm pp); 57.55Hz to 2,000Hz (196.2m/s), 2 hours | - | - |
| Shock Severity | 981m/s (100G), 18 shocks | 981m/s (100G) | - |
| Bump Severity | 390m/s (40G), 4,000+10 bumps | - | - |
| Vibration Severity (T-Contact) | - | 10Hz to 13.6Hz (35mm pp); 13.6Hz to 41.6Hz (1.5mm pp); 41.6Hz to 2,000Hz (392.4m/s), 6 hours | - |
| Clip Retention in Body | 18N min | - | - |
| Contact Retention in Housing | 10N min | - | - |
| Contact Replacement in Housing (Male Crimp) | 2 operations at 10N | - | - |
| Durability | 500 operations | 1,000 operations | - |
| Contact Holding Force | 0.2N min | - | - |
| Insertion Force (per contact) | 2.0N max (M80) / 1.0N max (M83) | 4.0N max | - |
| Withdrawal Force (per contact) | 0.2N min (M80) / 0.2N min (M83) | 0.5N min | - |
| Cable Contact Replacement in Housing | - | - | Up to 2 times max |
| Contact Wipe (T-Contact) | - | 2.00mm min | - |
Megastar ZX-PHB2.0-2-DZ
Product Overview Product Name: PHB2.0 (PHB2.0 Male Terminal) Model: ZX-PHB2.0-2-DZ Description: This is a PHB2.0 male terminal, designed for specific applications requiring reliable electrical connections. Certifications: RoHS compliant. Brand ZX Part Number ZX-PHB2.0-2-DZ Revision 0 Date 2020/12/02 ...
TE Connectivity 350792-1
TE Connectivity 828920-1
Product OverviewFunction/Usage: Single wire seal for 7.5mm (TC. System).Notes: Details of execution are left to the manufacturer. Suitable for wire size range 0.02-1.0mm. Suitable for insulation diameter 1.92-2.11mm. Insertion aid for single wire sealing: see document 3 1579007 2. Air bubbles are ...
TE Connectivity 929975-1
Product InformationThis document outlines specifications and guidelines related to electroplating processes, focusing on transition areas, overlapping layers, and surface requirements. It details acceptable plating thicknesses and conditions to ensure product integrity and performance.BrandRIVARKSOr...
