DEUTSCH WM-12P
DT Family Overview
Deutsch DT, DTM, and DTP Series environmentally sealed connectors are designed specifically for cable to cable applications. The DT connectors are used in harsh environment applications where even a small degradation in connection may be critical. Thermoplastic housings offer a wide operating temperature range and silicone rear wire and interface seals allow the connectors to withstand conditions of extreme temperature and moisture. The connector may be populated with either solid or stamped & formed style contacts. Contact insertion and removal does not require any special tools. Contacts are retained in locked position by dielectric fingers which are molded as an integral part of the housing. Secondary wedgelocks are assembled at the mating interfaces to ensure contact positioning. The Deutsch DT Series general purpose connectors will provide reliability and performance on the engine or transmission, under the hood, on the chassis, or in the cab.
Brand
Deutsch
Series
DT, DTM, DTP
Application
Cable to cable, harsh environments
Material
Thermoplastic housings, Silicone seals
Contact Types
Solid, Stamped & Formed
Contact Retention
Dielectric fingers, Secondary wedgelocks
Technical Specifications
| Series | Cavity | Contact Size | Amp Capacity (per contact) | Overall Length (Plug/Receptacle) | Overall Height (Plug/Receptacle) | Overall Width (Plug/Receptacle) |
|---|---|---|---|---|---|---|
| DT | 2 | 16 | 13 A | 1.118" (28.4 mm) / 1.708" (43.38 mm) | 0.628" (15.95 mm) / 0.670" (17.02 mm) | 0.591" (15.01 mm) / 0.675" (17.15 mm) |
| DT | 3 | 16 | 13 A | 1.118" (28.4 mm) / 1.698" (43.13 mm) | 0.934" (23.72 mm) / 0.973" (24.71 mm) | 0.718" (18.23 mm) / 0.832" (21.13 mm) |
| DT | 4 | 16 | 13 A | 1.218" (30.94 mm) / 1.808" (45.92 mm) | 0.724" (18.39 mm) / 0.776" (19.71 mm) | 0.716" (18.19 mm) / 0.820" (20.83 mm) |
| DT | 6 | 16 | 13 A | 1.218" (30.94 mm) / 1.808" (45.92 mm) | 0.891" (22.63 mm) / 0.951" (24.16 mm) | 0.716" (18.19 mm) / 0.820" (20.83 mm) |
| DT | 8 | 16 | 13 A | 1.217" (30.91 mm) / 1.798" (45.67 mm) | 0.776" (19.71 mm) / 1.000" (25.40 mm) | 1.465" (37.21 mm) / 1.435" (36.45 mm) |
| DT | 12 | 16 | 13 A | 1.218" (30.94 mm) / 1.808" (45.92 mm) | 0.716" (18.19 mm) / 0.876" (22.25 mm) | 1.597" (40.56 mm) / 1.597" (40.56 mm) |
| DTM | 2 | 20 | 7.5 A | 1.620" (41.15 mm) / 1.085" (27.56 mm) | 0.638" (16.21 mm) / 0.508" (12.90 mm) | 0.475" (12.07 mm) / 0.651" (16.54 mm) |
| DTM | 3 | 20 | 7.5 A | 1.620" (41.15 mm) / 1.085" (27.56 mm) | 0.638" (16.21 mm) / 0.551" (14.00 mm) | 0.640" (16.26 mm) / 0.861" (20.73 mm) |
| DTM | 4 | 20 | 7.5 A | 1.720" (43.69 mm) / 1.185" (30.10 mm) | 0.772" (19.61 mm) / 0.695" (17.65 mm) | 0.600" (15.24 mm) / 0.756" (19.20 mm) |
| DTM | 6 | 20 | 7.5 A | 1.720" (43.69 mm) / 1.185" (30.10 mm) | 0.937" (23.80 mm) / 0.817" (20.75 mm) | 0.600" (15.24 mm) / 0.756" (19.20 mm) |
| DTM | 8 | 20 | 7.5 A | 1.720" (43.69 mm) / 1.185" (30.10 mm) | 0.796" (20.22 mm) / 0.600" (15.24 mm) | 1.245" (31.62 mm) / 1.245" (31.62 mm) |
| DTM | 12 | 20 | 7.5 A | 1.720" (43.69 mm) / 1.185" (30.10 mm) | 0.796" (20.22 mm) / 0.600" (15.24 mm) | 1.575" (40.01 mm) / 1.575" (40.01 mm) |
| DTP | 2 | 12 | 25 A | 1.364" (34.65 mm) / 1.861" (47.27 mm) | 0.711" (18.06 mm) / 0.869" (22.07 mm) | 0.732" (18.59 mm) / 0.732" (18.59 mm) |
| DTP | 4 | 12 | 25 A | 1.364" (34.65 mm) / 1.861" (47.27 mm) | 0.960" (24.38 mm) / 1.069" (27.15 mm) | 0.868" (22.05 mm) / 0.868" (22.05 mm) |
| Series | Configuration | Keying Options | Notes |
|---|---|---|---|
| DT | 2, 3, 4, 6, 8, 12 Cavity | A, B, C, D | Size 16 contacts |
| DTM | 2, 3, 4, 6, 8, 12 Cavity | A, B, C, D | Size 20 contacts |
| DTP | 2, 4 Cavity | (Not specified in detail for all configurations) | Size 12 contacts |
| Modification | Description | Applicable Series | Notes |
|---|---|---|---|
| B016 | Enhanced mis-mating prevention with visual and tactile feedback. | DT (12 way), DTF (PCB) | Requires P012 plug for effectiveness. |
| P012 | Enhanced front seal retention for a tighter environmental seal. | DT | Requires P012 wedgelock. Available in 2, 3, 4, 6, 8, 12 cavity. Black body (except 8 & 12 cavity based on key). |
| E007 & E008 | Shrink boot adapters for added wire protection. | DTM (E007), DT (E008) | Accept shrink tubing. |
| C015 | Reduced diameter insert cavity for sealing smaller wire insulation. | DT, DTM | Also referred to as "E" seal. |
| E004 | Connector body color change to black. | DT | - |
| E003 | Protective end cap attached to the rear. | DT | Has holes for contact insertion. |
| E005 | Protective end cap with black connector body. | DT | - |
| Flange Modifications | Various mounting configurations and styles for simplified wire routing. | DT Series Receptacles | Includes Welded and Sealed flanges, with options for end caps and shrink boot adapters. |
HRS DF19-14S-1C
Product OverviewFor automotive equipment/devices demanding high reliability, please contact HIROSE ELECTRIC sales representatives. Drawing is for reference only.Product AttributesBrand: HIROSE ELECTRIC CO., LTD.Copyright Year: 2023Usage Consideration: Automotive equipment / device which demand high ...
HRS DF52-17S-0.8H(21)
DF52 Series 0.8mm Pitch, Compact and Robust Wire-to-Board ConnectorsThe DF52 Series connectors are designed for wire-to-board applications, offering a compact and robust solution with a 0.8mm pitch. They are suitable for various electronic devices and systems requiring reliable connections...
HRS DF36-15S-0.4V(51)
Product Overview The DF36 Series connectors are designed for vertical mating with a 0.4mm pitch, utilizing micro-coaxial cables. They are suitable for applications requiring compact and reliable connections. Brand HIROSE ELECTRIC CO., LTD. Product Series DF36 Series Pitch 0.4mm Mating Type Vertical ...
JAE Electronics FI-RE51S-VF-R1300
FI-R Series Connector for Internal Serial TransmissionThe FI-R series is a high-speed serial transmission connector designed for LVDS, TMDS (HDMI), and PCI Express applications. It is ideal for markets including personal computers, TVs, consumer devices, copiers, and medical equipment. Features ...
